main.h

Go to the documentation of this file.

#include "STAR_ADS126X.h"
 
#define READINGS_PER_MUX 1
#define FILTER ADS126X_SINC1
#define DATA_RATE ADS126X_RATE_38400
 
// ADC Reference Configuration
// Selects which voltage the ADS126X uses as its reference for ADC conversions.
// 0 = Internal 2.5V reference (codes convert as: voltage = code * 2.5 / 2^31)
// 1 = VDD (power supply, typically 3.3V or 5V). Receiver must know VDD to
// convert codes to volts. Note: Raw codes are sent over the wire; reference is
// NOT in the packet.
#define USE_VDD_REFERENCE 0