| _spi | ADS126X | |
| ADS126X(void) | ADS126X | |
| begin(uint8_t chip_select) | ADS126X | |
| begin(uint8_t chip_select, SPIClass *spi) | ADS126X | |
| begin(void) | ADS126X | |
| bypassPGA() | ADS126X | inline |
| bypassPGA(void) | ADS126X | |
| calibrateGainADC1(uint8_t vcc_pin, uint8_t gnd_pin) | ADS126X | |
| calibrateGainADC2(uint8_t vcc_pin, uint8_t gnd_pin) | ADS126X | |
| calibrateSelfOffsetADC1(void) | ADS126X | |
| calibrateSelfOffsetADC2(void) | ADS126X | |
| calibrateSysOffsetADC1(uint8_t shorted1, uint8_t shorted2) | ADS126X | |
| calibrateSysOffsetADC2(uint8_t shorted1, uint8_t shorted2) | ADS126X | |
| check_checksum(uint32_t val, uint8_t byt) | ADS126X | |
| check_crc(uint32_t val, uint8_t byt) | ADS126X | |
| checkResetBit(void) | ADS126X | |
| CHECKSUM | ADS126X | |
| clearResetBit(void) | ADS126X | |
| cs_pin | ADS126X | |
| cs_used | ADS126X | |
| disableCheck(void) | ADS126X | |
| disableInternalReference(void) | ADS126X | |
| disableLevelShift(void) | ADS126X | |
| disableStatus(void) | ADS126X | |
| enableInternalReference(void) | ADS126X | |
| enableLevelShift(void) | ADS126X | |
| enablePGA(void) | ADS126X | |
| enableStatus(void) | ADS126X | |
| lastADC1LowReferenceAlarm(void) | ADS126X | |
| lastADC1PGADifferentialOutputAlarm(void) | ADS126X | |
| lastADC1PGAOutputHighAlarm(void) | ADS126X | |
| lastADC1PGAOutputLowAlarm(void) | ADS126X | |
| lastADC1Status(void) | ADS126X | |
| lastADC2Status(void) | ADS126X | |
| lastChecksum(void) | ADS126X | |
| lastClockSource(void) | ADS126X | |
| lastReset(void) | ADS126X | |
| lastStatus(void) | ADS126X | |
| msb_pos(uint64_t val) | ADS126X | |
| noOperation(void) | ADS126X | |
| readADC1() | ADS126X | inline |
| readADC1() | ADS126X | |
| readADC1(uint8_t pos_pin, uint8_t neg_pin) | ADS126X | |
| readADC2() | ADS126X | |
| readADC2(uint8_t pos_pin, uint8_t neg_pin) | ADS126X | |
| readAllRegisters() | ADS126X | |
| readRegister(uint8_t reg) | ADS126X | |
| readRegisters(uint8_t start_reg, uint8_t num) | ADS126X | |
| REGISTER | ADS126X | |
| REGISTER_ARRAY | ADS126X | |
| reset(void) | ADS126X | |
| sendCommand(uint8_t command) | ADS126X | |
| setADC2Mux(uint8_t pos_pin, uint8_t neg_pin) | ADS126X | |
| setBiasADC(uint8_t adc) | ADS126X | inline |
| setBiasADC(uint8_t adc_choice) | ADS126X | |
| setBiasMagnitude(uint8_t mag) | ADS126X | inline |
| setBiasMagnitude(uint8_t mag) | ADS126X | |
| setBiasPolarity(uint8_t pol) | ADS126X | inline |
| setBiasPolarity(uint8_t polarity) | ADS126X | |
| setChecksumMode(void) | ADS126X | |
| setChopMode(uint8_t mode) | ADS126X | |
| setContinuousMode(void) | ADS126X | |
| setCRCMode(void) | ADS126X | |
| setDelay(uint8_t del) | ADS126X | |
| setFilter(uint8_t filter) | ADS126X | |
| setGain(uint8_t gain) | ADS126X | |
| setIDAC1Mag(uint8_t mag) | ADS126X | inline |
| setIDAC1Mag(uint8_t magnitude) | ADS126X | |
| setIDAC1Pin(uint8_t pin) | ADS126X | |
| setIDAC2Mag(uint8_t mag) | ADS126X | inline |
| setIDAC2Mag(uint8_t magnitude) | ADS126X | |
| setIDAC2Pin(uint8_t pin) | ADS126X | |
| setInputMux(uint8_t pos, uint8_t neg) | ADS126X | inline |
| setInputMux(uint8_t pos_pin, uint8_t neg_pin) | ADS126X | |
| setOutputmagnitudeTDACN(uint8_t mag) | ADS126X | inline |
| setOutputmagnitudeTDACN(uint8_t mag) | ADS126X | |
| setOutputmagnitudeTDACP(uint8_t mag) | ADS126X | inline |
| setOutputmagnitudeTDACP(uint8_t mag) | ADS126X | |
| setOutputTDACN(uint8_t on) | ADS126X | inline |
| setOutputTDACN(bool enable) | ADS126X | |
| setOutputTDACP(uint8_t on) | ADS126X | inline |
| setOutputTDACP(bool enable) | ADS126X | |
| setPulseMode(void) | ADS126X | |
| setRate(uint8_t rate) | ADS126X | |
| setReference(uint8_t neg, uint8_t pos) | ADS126X | inline |
| setReference(uint8_t negativeReference, uint8_t positiveReference) | ADS126X | |
| setReservedTDACN() | ADS126X | |
| setReservedTDACP() | ADS126X | |
| setStartPin(uint8_t pin) | ADS126X | |
| spi_rw(uint8_t buff[], uint8_t len) | ADS126X | |
| start_pin | ADS126X | |
| start_used | ADS126X | |
| startADC1() | ADS126X | inline |
| startADC1(void) | ADS126X | |
| startADC2(void) | ADS126X | |
| STATUS | ADS126X | |
| stopADC1() | ADS126X | inline |
| stopADC1(void) | ADS126X | |
| stopADC2(void) | ADS126X | |
| writeRegister(uint8_t reg) | ADS126X | |
| writeRegisters(uint8_t start_reg, uint8_t num) | ADS126X | |
1.15.0