Collaboration diagram for RTC Exported Macros:

Macros
#define	__HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)
	Enable the RTC WakeUp Timer peripheral.
#define	__HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)
	Disable the RTC WakeUp Timer peripheral.
#define	__HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)
	Enable the RTC WakeUpTimer interrupt.
#define	__HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)
	Disable the RTC WakeUpTimer interrupt.
#define	__HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)
	Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
#define	__HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)
	Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
#define	__HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)
	Get the selected RTC WakeUpTimer's flag status.
#define	__HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__)
	Clear the RTC Wake Up timer's pending flags.
#define	__HAL_RTC_TAMPER1_ENABLE(__HANDLE__)
	Enable the RTC Tamper1 input detection.
#define	__HAL_RTC_TAMPER1_DISABLE(__HANDLE__)
	Disable the RTC Tamper1 input detection.
#define	__HAL_RTC_TAMPER3_ENABLE(__HANDLE__)
	Enable the RTC Tamper2 input detection.
#define	__HAL_RTC_TAMPER3_DISABLE(__HANDLE__)
	Disable the RTC Tamper3 input detection.
#define	__HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__)
	Enable the RTC Tamper interrupt.
#define	__HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__)
	Disable the RTC Tamper interrupt.
#define	__HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)
	Check whether the specified RTC Tamper interrupt has been enabled or not.
#define	__HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)
	Get the selected RTC Tamper's flag status.
#define	__HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)
	Clear the RTC Tamper's pending flags.
#define	__HAL_RTC_TAMPER_GET_SAMPLING_FREQ(__HANDLE__)
	Get the frequency at which each of the Tamper inputs are sampled.
#define	__HAL_RTC_TAMPER_GET_SAMPLES_COUNT(__HANDLE__)
	Get the number of consecutive samples at the specified level needed to activate a Tamper event.
#define	__HAL_RTC_TAMPER_GET_PRCHRG_DURATION(__HANDLE__)
	Get the pull-up resistors precharge duration.
#define	__HAL_RTC_TAMPER_GET_PULLUP_STATUS(__HANDLE__)
	Get the pull-up resistors status.
#define	__HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)
	Enable the RTC TimeStamp peripheral.
#define	__HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)
	Disable the RTC TimeStamp peripheral.
#define	__HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)
	Enable the RTC TimeStamp interrupt.
#define	__HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)
	Disable the RTC TimeStamp interrupt.
#define	__HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)
	Check whether the specified RTC TimeStamp interrupt has occurred or not.
#define	__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)
	Check whether the specified RTC Time Stamp interrupt has been enabled or not.
#define	__HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)
	Get the selected RTC TimeStamp's flag status.
#define	__HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)
	Clear the RTC Time Stamp's pending flags.
#define	__HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__)
	Enable the RTC internal TimeStamp peripheral.
#define	__HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__)
	Disable the RTC internal TimeStamp peripheral.
#define	__HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)
	Get the selected RTC Internal Time Stamp's flag status.
#define	__HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)
	Clear the RTC Internal Time Stamp's pending flags.
#define	__HAL_RTC_TAMPTS_ENABLE(__HANDLE__)
	Enable the RTC TimeStamp on Tamper detection.
#define	__HAL_RTC_TAMPTS_DISABLE(__HANDLE__)
	Disable the RTC TimeStamp on Tamper detection.
#define	__HAL_RTC_TAMPTS_GET_STATUS(__HANDLE__)
	Get activation status of the RTC TimeStamp on Tamper detection.
#define	__HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)
	Enable the RTC calibration output.
#define	__HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)
	Disable the calibration output.
#define	__HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)
	Enable the clock reference detection.
#define	__HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)
	Disable the clock reference detection.
#define	__HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__)
	Get the selected RTC shift operation's flag status.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT()
	Enable interrupt on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT()
	Disable interrupt on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT()
	Enable event on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT()
	Disable event on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTID3_ENABLE_EVENT()
	Enable event on the RTC WakeUp Timer associated D3 Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTID3_DISABLE_EVENT()
	Disable event on the RTC WakeUp Timer associated D3 Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE()
	Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE()
	Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE()
	Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE()
	Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE()
	Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE()
	Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG()
	Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG()
	Clear the RTC WakeUp Timer associated Exti line flag.
#define	__HAL_RTC_WAKEUPTIMER_EXTID3_GET_FLAG()
	Check whether the RTC WakeUp Timer associated D3 Exti line interrupt flag is set or not.
#define	__HAL_RTC_WAKEUPTIMER_EXTID3_CLEAR_FLAG()
	Clear the RTC WakeUp Timer associated D3 Exti line flag.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT()
	Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()
	Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()
	Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT()
	Enable event on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT()
	Disable event on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE()
	Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE()
	Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE()
	Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE()
	Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE()
	Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE()
	Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()
	Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()
	Clear the RTC Tamper and Timestamp associated Exti line flag.
#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()
	Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line.

Detailed Description

Macro Definition Documentation

◆ __HAL_RTC_CALIBRATION_OUTPUT_DISABLE

#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))

RTC_CR_COE

#define RTC_CR_COE

Definition stm32h723xx.h:16584

Disable the calibration output.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1309 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_CALIBRATION_OUTPUT_ENABLE

#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR |= (RTC_CR_COE))

Enable the RTC calibration output.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1302 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_CLOCKREF_DETECTION_DISABLE

#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))

RTC_CR_REFCKON

#define RTC_CR_REFCKON

Definition stm32h723xx.h:16637

Disable the clock reference detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1323 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_CLOCKREF_DETECTION_ENABLE

#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))

Enable the clock reference detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1316 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG

#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

((__HANDLE__)->Instance->ISR = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)))

RTC_ISR_INIT

#define RTC_ISR_INIT

Definition stm32h723xx.h:16681

Clear the RTC Internal Time Stamp's pending flags.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC Internal Time Stamp Flag source to clear. This parameter can be: RTC_FLAG_ITSF

Note: This flag must be cleared together with TSF flag.

Return values

None

Definition at line 1238 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE

#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE))

RTC_CR_ITSE

#define RTC_CR_ITSE

Definition stm32h723xx.h:16581

Disable the RTC internal TimeStamp peripheral.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1210 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE

#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE))

Enable the RTC internal TimeStamp peripheral.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1203 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG

#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U)

Get the selected RTC Internal Time Stamp's flag status.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC Internal Time Stamp Flag is pending or not. This parameter can be: RTC_FLAG_ITSF

Return values

Flag status

Definition at line 1223 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_SHIFT_GET_FLAG

#define __HAL_RTC_SHIFT_GET_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U)

Get the selected RTC shift operation's flag status.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC shift operation Flag is pending or not. This parameter can be: RTC_FLAG_SHPF

Return values

Flag status

Definition at line 1336 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER1_DISABLE

#define __HAL_RTC_TAMPER1_DISABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))

RTC_TAMPCR_TAMP1E

#define RTC_TAMPCR_TAMP1E

Definition stm32h723xx.h:17071

Disable the RTC Tamper1 input detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 902 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER1_ENABLE

#define __HAL_RTC_TAMPER1_ENABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E))

Enable the RTC Tamper1 input detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 891 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER3_DISABLE

#define __HAL_RTC_TAMPER3_DISABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))

RTC_TAMPCR_TAMP3E

#define RTC_TAMPCR_TAMP3E

Definition stm32h723xx.h:17062

Disable the RTC Tamper3 input detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 950 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER3_ENABLE

#define __HAL_RTC_TAMPER3_ENABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E))

Enable the RTC Tamper2 input detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Disable the RTC Tamper2 input detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Enable the RTC Tamper3 input detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 939 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_CLEAR_FLAG

#define __HAL_RTC_TAMPER_CLEAR_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

Clear the RTC Tamper's pending flags.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC Tamper Flag to clear. This parameter can be: RTC_FLAG_TAMP1F: Tamper1 flag RTC_FLAG_TAMP2F: Tamper2 flag () RTC_FLAG_TAMP3F: Tamper3 flag () Not applicable to all devices.

Return values

None

Definition at line 1038 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_DISABLE_IT

#define __HAL_RTC_TAMPER_DISABLE_IT	(		__HANDLE__,
			__INTERRUPT__ )

Value:

((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))

Disable the RTC Tamper interrupt.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC Tamper interrupt sources to be disabled. This parameter can be any combination of the following values: RTC_IT_TAMP: All tampers interrupts RTC_IT_TAMP1: Tamper1 interrupt RTC_IT_TAMP2: Tamper2 interrupt () RTC_IT_TAMP3: Tamper3 interrupt () Not applicable to all devices.

Return values

None

Definition at line 986 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_ENABLE_IT

#define __HAL_RTC_TAMPER_ENABLE_IT	(		__HANDLE__,
			__INTERRUPT__ )

Value:

((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))

Enable the RTC Tamper interrupt.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC Tamper interrupt sources to be enabled. This parameter can be any combination of the following values: RTC_IT_TAMPALL: All tampers interrupts RTC_IT_TAMP1: Tamper1 interrupt RTC_IT_TAMP2: Tamper2 interrupt () RTC_IT_TAMP3: Tamper3 interrupt () Not applicable to all devices.

Return values

None

Definition at line 968 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_FLAG

#define __HAL_RTC_TAMPER_GET_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U)

Get the selected RTC Tamper's flag status.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC Tamper Flag is pending or not. This parameter can be: RTC_FLAG_TAMP1F: Tamper1 flag RTC_FLAG_TAMP2F: Tamper2 flag () RTC_FLAG_TAMP3F: Tamper3 flag () Not applicable to all devices.

Return values

Flag status

Definition at line 1021 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_IT_SOURCE

#define __HAL_RTC_TAMPER_GET_IT_SOURCE	(		__HANDLE__,
			__INTERRUPT__ )

Value:

(((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)

Check whether the specified RTC Tamper interrupt has been enabled or not.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC Tamper interrupt source to check. This parameter can be: RTC_IT_TAMPALL: All tampers interrupts RTC_IT_TAMP1: Tamper1 interrupt RTC_IT_TAMP2: Tamper2 interrupt () RTC_IT_TAMP3: Tamper3 interrupt () Not applicable to all devices.

Return values

Flag status

Definition at line 1004 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_PRCHRG_DURATION

#define __HAL_RTC_TAMPER_GET_PRCHRG_DURATION ( __HANDLE__ )

Value:

((uint32_t)(((__HANDLE__)->Instance->TAMPCR) & (RTC_TAMPERPRECHARGEDURATION_MASK)))

RTC_TAMPERPRECHARGEDURATION_MASK

#define RTC_TAMPERPRECHARGEDURATION_MASK

Masking all bits except those of field TAMPPRCH[1:0].

Definition stm32h7xx_hal_rtc_ex.h:561

Get the pull-up resistors precharge duration.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

Number

of consecutive samples This value can be:

RTC_TAMPERPRECHARGEDURATION_1RTCCLK
RTC_TAMPERPRECHARGEDURATION_2RTCCLK
RTC_TAMPERPRECHARGEDURATION_4RTCCLK
RTC_TAMPERPRECHARGEDURATION_8RTCCLK

Definition at line 1090 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_PULLUP_STATUS

#define __HAL_RTC_TAMPER_GET_PULLUP_STATUS ( __HANDLE__ )

Value:

((uint32_t)(((__HANDLE__)->Instance->TAMPCR) & (RTC_TAMPER_PULLUP_MASK)))

RTC_TAMPER_PULLUP_MASK

#define RTC_TAMPER_PULLUP_MASK

Maskin all bits except bit TAMPPUDIS.

Definition stm32h7xx_hal_rtc_ex.h:594

Get the pull-up resistors status.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

Pull-up

resistors status This value can be:

RTC_TAMPER_PULLUP_ENABLE
RTC_TAMPER_PULLUP_DISABLE

Definition at line 1104 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_SAMPLES_COUNT

#define __HAL_RTC_TAMPER_GET_SAMPLES_COUNT ( __HANDLE__ )

Value:

((uint32_t)(((__HANDLE__)->Instance->TAMPCR) & (RTC_TAMPERFILTER_MASK)))

RTC_TAMPERFILTER_MASK

#define RTC_TAMPERFILTER_MASK

Masking all bits except those of field TAMPFLT[1:0].

Definition stm32h7xx_hal_rtc_ex.h:485

Get the number of consecutive samples at the specified level needed to activate a Tamper event.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

Number

of consecutive samples This value can be:

RTC_TAMPERFILTER_DISABLE
RTC_TAMPERFILTER_2SAMPLE
RTC_TAMPERFILTER_4SAMPLE
RTC_TAMPERFILTER_8SAMPLE

Definition at line 1074 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_SAMPLING_FREQ

#define __HAL_RTC_TAMPER_GET_SAMPLING_FREQ ( __HANDLE__ )

Value:

((uint32_t)(((__HANDLE__)->Instance->TAMPCR) & (RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK)))

RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK

#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK

Masking all bits except those of field TAMPFREQ[2:0].

Definition stm32h7xx_hal_rtc_ex.h:531

Get the frequency at which each of the Tamper inputs are sampled.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

Sampling

frequency This value can be:

RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768
RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384
RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192
RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096
RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048
RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512
RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256

Definition at line 1057 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG ( )

Value:

(EXTI->PR1 = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

EXTI

#define EXTI

Definition stm32h723xx.h:2477

RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT

#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT

External interrupt line 18 Connected to the RTC Tamper and Time Stamp events.

Definition stm32h7xx_hal_rtc_ex.h:1831

Clear the RTC Tamper and Timestamp associated Exti line flag.

Return values

None

Definition at line 1650 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT ( )

Value:

(EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

Disable event on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1559 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE ( )

Value:

(EXTI->FTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1601 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT ( )

Value:

(EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

Disable interrupt on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1539 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE ( )

Value:

(EXTI->RTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1613 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE ( )

Value:

                                                                        do { \
                                                                        __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();  \
                                                                        __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \
                                                                       } while(0)

Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1628 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT ( )

Value:

(EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Enable event on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1549 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE ( )

Value:

(EXTI->FTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1595 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT ( )

Value:

(EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Enable interrupt on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1529 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE ( )

Value:

(EXTI->RTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1607 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE ( )

Value:

                                                                        do { \
                                                                        __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();  \
                                                                        __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
                                                                      } while(0)

Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1619 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT ( )

Value:

(EXTI->SWIER1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 1672 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG ( )

Value:

(EXTI->PR1 & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.

Return values

Line Status

Definition at line 1640 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPTS_DISABLE

#define __HAL_RTC_TAMPTS_DISABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TIMESTAMPONTAMPERDETECTION_MASK))

RTC_TIMESTAMPONTAMPERDETECTION_MASK

#define RTC_TIMESTAMPONTAMPERDETECTION_MASK

Masking all bits except bit TAMPTS.

Definition stm32h7xx_hal_rtc_ex.h:578

Disable the RTC TimeStamp on Tamper detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1260 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPTS_ENABLE

#define __HAL_RTC_TAMPTS_ENABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->TAMPCR |= (RTC_TIMESTAMPONTAMPERDETECTION_MASK))

Enable the RTC TimeStamp on Tamper detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1249 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPTS_GET_STATUS

#define __HAL_RTC_TAMPTS_GET_STATUS ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->TAMPCR &= RTC_TIMESTAMPONTAMPERDETECTION_MASK)

Get activation status of the RTC TimeStamp on Tamper detection.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

Activation

status of TimeStamp on Tamper detection This value can be:

RTC_TIMESTAMPONTAMPERDETECTION_ENABLE
RTC_TIMESTAMPONTAMPERDETECTION_DISABLE

Definition at line 1274 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_CLEAR_FLAG

#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

((__HANDLE__)->Instance->ISR = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)))

Clear the RTC Time Stamp's pending flags.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC Alarm Flag sources to clear. This parameter can be: RTC_FLAG_TSF RTC_FLAG_TSOVF

Return values

None

Definition at line 1195 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_DISABLE

#define __HAL_RTC_TIMESTAMP_DISABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))

RTC_CR_TSE

#define RTC_CR_TSE

Definition stm32h723xx.h:16619

Disable the RTC TimeStamp peripheral.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1123 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_DISABLE_IT

#define __HAL_RTC_TIMESTAMP_DISABLE_IT	(		__HANDLE__,
			__INTERRUPT__ )

Value:

((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))

Disable the RTC TimeStamp interrupt.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC TimeStamp interrupt source to be disabled. This parameter can be: RTC_IT_TS TimeStamp interrupt

Return values

None

Definition at line 1143 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_ENABLE

#define __HAL_RTC_TIMESTAMP_ENABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))

Enable the RTC TimeStamp peripheral.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 1116 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_ENABLE_IT

#define __HAL_RTC_TIMESTAMP_ENABLE_IT	(		__HANDLE__,
			__INTERRUPT__ )

Value:

((__HANDLE__)->Instance->CR |= (__INTERRUPT__))

Enable the RTC TimeStamp interrupt.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC TimeStamp interrupt source to be enabled. This parameter can be: RTC_IT_TS TimeStamp interrupt

Return values

None

Definition at line 1133 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_GET_FLAG

#define __HAL_RTC_TIMESTAMP_GET_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U)

Get the selected RTC TimeStamp's flag status.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC TimeStamp Flag is pending or not. This parameter can be: RTC_FLAG_TSF RTC_FLAG_TSOVF

Return values

Flag status

Definition at line 1180 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_GET_IT

#define __HAL_RTC_TIMESTAMP_GET_IT	(		__HANDLE__,
			__INTERRUPT__ )

Value:

(((((__HANDLE__)->Instance->ISR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)

Check whether the specified RTC TimeStamp interrupt has occurred or not.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC TimeStamp interrupt source to check. This parameter can be: RTC_IT_TS TimeStamp interrupt

Return values

None

Definition at line 1156 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_GET_IT_SOURCE

#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE	(		__HANDLE__,
			__INTERRUPT__ )

Value:

(((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)

Check whether the specified RTC Time Stamp interrupt has been enabled or not.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC Time Stamp interrupt source to check. This parameter can be: RTC_IT_TS TimeStamp interrupt

Return values

None

Definition at line 1166 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG

#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

Clear the RTC Wake Up timer's pending flags.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC WakeUpTimer Flag to clear. This parameter can be: RTC_FLAG_WUTF

Return values

None

Definition at line 876 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_DISABLE

#define __HAL_RTC_WAKEUPTIMER_DISABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))

RTC_CR_WUTE

#define RTC_CR_WUTE

Definition stm32h723xx.h:16622

Disable the RTC WakeUp Timer peripheral.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 796 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_DISABLE_IT

#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT	(		__HANDLE__,
			__INTERRUPT__ )

Value:

((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))

Disable the RTC WakeUpTimer interrupt.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC WakeUpTimer interrupt sources to be disabled. This parameter can be: RTC_IT_WUT WakeUpTimer interrupt

Return values

None

Definition at line 816 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_ENABLE

#define __HAL_RTC_WAKEUPTIMER_ENABLE ( __HANDLE__ )

Value:

((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))

Enable the RTC WakeUp Timer peripheral.

Parameters

__HANDLE__ specifies the RTC handle.

Return values

None

Definition at line 789 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_ENABLE_IT

#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT	(		__HANDLE__,
			__INTERRUPT__ )

Value:

((__HANDLE__)->Instance->CR |= (__INTERRUPT__))

Enable the RTC WakeUpTimer interrupt.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC WakeUpTimer interrupt sources to be enabled. This parameter can be: RTC_IT_WUT WakeUpTimer interrupt

Return values

None

Definition at line 806 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG

#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG ( )

Value:

(EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

RTC_EXTI_LINE_WAKEUPTIMER_EVENT

#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT

External interrupt line 19 Connected to the RTC Wakeup event.

Definition stm32h7xx_hal_rtc_ex.h:1832

Clear the RTC WakeUp Timer associated Exti line flag.

Return values

None

Definition at line 1481 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT ( )

Value:

(EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable event on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1379 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE ( )

Value:

(EXTI->FTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1431 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT ( )

Value:

(EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable interrupt on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1359 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE ( )

Value:

(EXTI->RTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1443 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE ( )

Value:

                                                                   do { \
                                                                   __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();  \
                                                                   __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \
                                                                  } while(0)

Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.

This parameter can be:

Return values

None

Definition at line 1459 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT ( )

Value:

(EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable event on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1369 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE ( )

Value:

(EXTI->FTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1425 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT ( )

Value:

(EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable interrupt on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1350 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE ( )

Value:

(EXTI->RTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1437 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE ( )

Value:

                                                                   do { \
                                                                   __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();  \
                                                                   __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \
                                                                 } while(0)

Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 1449 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT

#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT ( )

Value:

(EXTI->SWIER1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 1500 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG

#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG ( )

Value:

(EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.

Return values

Line Status.

Definition at line 1471 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTID3_CLEAR_FLAG

#define __HAL_RTC_WAKEUPTIMER_EXTID3_CLEAR_FLAG ( )

Value:

(EXTI_D3->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Clear the RTC WakeUp Timer associated D3 Exti line flag.

Return values

None.

Definition at line 1494 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTID3_DISABLE_EVENT

#define __HAL_RTC_WAKEUPTIMER_EXTID3_DISABLE_EVENT ( )

Value:

(EXTI->D3PMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable event on the RTC WakeUp Timer associated D3 Exti line.

Return values

None

Definition at line 1392 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTID3_ENABLE_EVENT

#define __HAL_RTC_WAKEUPTIMER_EXTID3_ENABLE_EVENT ( )

Value:

(EXTI->D3PMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable event on the RTC WakeUp Timer associated D3 Exti line.

Return values

None

Definition at line 1386 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTID3_GET_FLAG

#define __HAL_RTC_WAKEUPTIMER_EXTID3_GET_FLAG ( )

Value:

(EXTI_D3->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Check whether the RTC WakeUp Timer associated D3 Exti line interrupt flag is set or not.

Return values

Line Status

Definition at line 1488 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_GET_FLAG

#define __HAL_RTC_WAKEUPTIMER_GET_FLAG	(		__HANDLE__,
			__FLAG__ )

Value:

(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U)

Get the selected RTC WakeUpTimer's flag status.

Parameters

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC WakeUpTimer Flag sources to check. This parameter can be: RTC_FLAG_WUTF RTC_FLAG_WUTWF

Return values

Flag status

Definition at line 862 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_GET_IT

#define __HAL_RTC_WAKEUPTIMER_GET_IT	(		__HANDLE__,
			__INTERRUPT__ )

Value:

(((((__HANDLE__)->Instance->ISR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)

Check whether the specified RTC WakeUpTimer interrupt has occurred or not.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC WakeUpTimer interrupt sources to check. This parameter can be: RTC_FLAG_WUTF WakeUpTimer interrupt flag

Return values

None

Definition at line 829 of file stm32h7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE

#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE	(		__HANDLE__,
			__INTERRUPT__ )

Value:

(((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)

Check whether the specified RTC Wake Up timer interrupt has been enabled or not.

Parameters

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC Wake Up timer interrupt sources to check. This parameter can be: RTC_IT_WUT WakeUpTimer interrupt

Return values

None

Definition at line 840 of file stm32h7xx_hal_rtc_ex.h.