engine.pipeline.config_schemas.FinsConfig Class Reference

Inheritance diagram for engine.pipeline.config_schemas.FinsConfig:

Collaboration diagram for engine.pipeline.config_schemas.FinsConfig:

Static Public Attributes
int	no_fins = Field(gt=0, description="Number of fins (typically 3 or 4)")
float	root_chord = Field(gt=0, description="Root chord length (fin edge attached to body) [m]")
float	tip_chord = Field(gt=0, description="Tip chord length (outer fin edge) [m]")
float	fin_span = Field(gt=0, description="Fin span (height from body to fin tip) [m]")
float	fin_position = Field(description="Fin leading edge position from rocket tail (z=0) [m]")

Detailed Description

Fins configuration for flight simulation

Definition at line 1473 of file config_schemas.py.

Member Data Documentation

fin_position

float engine.pipeline.config_schemas.FinsConfig.fin_position = Field(description="Fin leading edge position from rocket tail (z=0) [m]")

static

Definition at line 1479 of file config_schemas.py.

fin_span

float engine.pipeline.config_schemas.FinsConfig.fin_span = Field(gt=0, description="Fin span (height from body to fin tip) [m]")

static

Definition at line 1478 of file config_schemas.py.

no_fins

int engine.pipeline.config_schemas.FinsConfig.no_fins = Field(gt=0, description="Number of fins (typically 3 or 4)")

static

Definition at line 1475 of file config_schemas.py.

root_chord

float engine.pipeline.config_schemas.FinsConfig.root_chord = Field(gt=0, description="Root chord length (fin edge attached to body) [m]")

static

Definition at line 1476 of file config_schemas.py.

tip_chord

float engine.pipeline.config_schemas.FinsConfig.tip_chord = Field(gt=0, description="Tip chord length (outer fin edge) [m]")

static

Definition at line 1477 of file config_schemas.py.

---

The documentation for this class was generated from the following file:

• EngineDesign/engine/pipeline/config_schemas.py