engine.pipeline.config_schemas.MeasurementsConfig Class Reference

Inheritance diagram for engine.pipeline.config_schemas.MeasurementsConfig:

Collaboration diagram for engine.pipeline.config_schemas.MeasurementsConfig:

Static Public Attributes
Optional	cd_O = Field(default=None, description="Oxidizer orifice Cd (cold flow), replaces the discharge model.")
Optional	cd_F = Field(default=None, description="Fuel orifice Cd (cold flow), replaces the discharge model.")
Optional	em = Field(default=None, description="Element mixing factor E_m (cold-flow patternation), used as measured in place of Rupe's curve.")
Optional	d32_O_um = Field(default=None, description="Oxidizer-stream D32 [µm] at the design point, held at that value.")
Optional	d32_F_um = Field(default=None, description="Fuel-stream D32 [µm] at the design point, held at that value.")
Optional	nozzle_efficiency = Field(default=None, description="Nozzle efficiency ζ_n from measured thrust, replaces the assumed factor.")
Optional	chug_frequency_hz = Field(default=None, description="Chug frequency seen in hot fire [Hz]: shown beside the model's, not fed in.")

Detailed Description

Measured values that replace the model's assumptions wherever they enter
(engine/pipeline/measurements.py). Each one turns its ◇ in forward mode into ●.

Definition at line 2723 of file config_schemas.py.

Member Data Documentation

cd_F

Optional engine.pipeline.config_schemas.MeasurementsConfig.cd_F = Field(default=None, description="Fuel orifice Cd (cold flow), replaces the discharge model.")

static

Definition at line 2727 of file config_schemas.py.

cd_O

Optional engine.pipeline.config_schemas.MeasurementsConfig.cd_O = Field(default=None, description="Oxidizer orifice Cd (cold flow), replaces the discharge model.")

static

Definition at line 2726 of file config_schemas.py.

chug_frequency_hz

Optional engine.pipeline.config_schemas.MeasurementsConfig.chug_frequency_hz = Field(default=None, description="Chug frequency seen in hot fire [Hz]: shown beside the model's, not fed in.")

static

Definition at line 2732 of file config_schemas.py.

d32_F_um

Optional engine.pipeline.config_schemas.MeasurementsConfig.d32_F_um = Field(default=None, description="Fuel-stream D32 [µm] at the design point, held at that value.")

static

Definition at line 2730 of file config_schemas.py.

d32_O_um

Optional engine.pipeline.config_schemas.MeasurementsConfig.d32_O_um = Field(default=None, description="Oxidizer-stream D32 [µm] at the design point, held at that value.")

static

Definition at line 2729 of file config_schemas.py.

em

Optional engine.pipeline.config_schemas.MeasurementsConfig.em = Field(default=None, description="Element mixing factor E_m (cold-flow patternation), used as measured in place of Rupe's curve.")

static

Definition at line 2728 of file config_schemas.py.

nozzle_efficiency

Optional engine.pipeline.config_schemas.MeasurementsConfig.nozzle_efficiency = Field(default=None, description="Nozzle efficiency ζ_n from measured thrust, replaces the assumed factor.")

static

Definition at line 2731 of file config_schemas.py.

---

The documentation for this class was generated from the following file:

• EngineDesign/engine/pipeline/config_schemas.py