Simple_Test Directory Reference

Directory dependency graph for Simple_Test:

Directories
	src

Detailed Description

ADS126X Simple Test

What It Does

Tests a single ADC channel, using a chosen pin. Note that this script currently only does single ended measurements, referenced to AINCOM. So it works for testing the PT / TC, but results may vary with LC and RTD depending on if the AINCOM is grounded.

Usage

1. Supply at external voltage, under 2.5V, to the chosen pin, relative to GND (technically AINCOM)
2. Upload main.cpp
3. Open Serial Monitor (115200 baud)
4. Check that the voltages printed are as expected

Configuration

In main, change the following line to automatically use the correct pins for the board being tested (PT_Board, LC_Board, RTD_Board, or TC_Board)

#define PINS_ACTIVE_LAYOUT sense_board_pins::PT_Board

Additionally, change the following lines to set what connectors and pin you want to ouse

#define TEST_CONNECTOR 3
#define TEST_PIN 1