main.cpp File Reference

#include <Arduino.h>
#include <SPI.h>
#include "constants.h"
#include "my_ADS126X.h"
#include "noise_analyzer.h"
#include "sense_board_pins.h"

Include dependency graph for main.cpp:

Go to the source code of this file.

Classes
struct	TestConfig

Macros
#define	USE_ADC1   1
#define	USE_CHOP   0
#define	PINS_ACTIVE_LAYOUT   sense_board_pins::PT_Board

Functions
size_t	getSampleCount (uint16_t sps)
void	configureADC (const TestConfig &config)
void	printResults (const TestConfig &config)
void	setup ()
void	loop ()

Variables
static ADS126X	ads126x
NoiseAnalyzer	noiseAnalyzer
TestConfig	testConfigs []
const int	numConfigs = sizeof(testConfigs) / sizeof(testConfigs[0])
int	currentConfigIndex = 0
bool	testComplete = false
size_t	targetSamples = 0
constexpr const Layout &	Pins

Macro Definition Documentation

PINS_ACTIVE_LAYOUT

#define PINS_ACTIVE_LAYOUT   sense_board_pins::PT_Board

Definition at line 13 of file main.cpp.

USE_ADC1

#define USE_ADC1   1

Definition at line 8 of file main.cpp.

Referenced by configureADC(), loop(), printResults(), and setup().

USE_CHOP

#define USE_CHOP   0

Definition at line 9 of file main.cpp.

Referenced by setup().

Function Documentation

configureADC()

void configureADC

(

const TestConfig &

config

)

Definition at line 78 of file main.cpp.

References ads126x, config, delay(), and USE_ADC1.

Referenced by loop(), and setup().

getSampleCount()

size_t getSampleCount

(

uint16_t

sps

)

Definition at line 63 of file main.cpp.

Referenced by loop(), and setup().

loop()

void loop

(

)

Definition at line 201 of file main.cpp.

References ads126x, configureADC(), count(), currentConfigIndex, delay(), delayMicroseconds(), digitalRead(), getSampleCount(), LOW, noiseAnalyzer, numConfigs, Pins, printResults(), Serial, targetSamples, testComplete, testConfigs, and USE_ADC1.

printResults()

void printResults

(

const TestConfig &

config

)

Definition at line 102 of file main.cpp.

References config, noiseAnalyzer, Serial, and USE_ADC1.

Referenced by loop().

setup()

void setup

(

void

)

Definition at line 142 of file main.cpp.

References ads126x, ADS126X_CHOP_1, ADS126X_TDAC, configureADC(), currentConfigIndex, delay(), getSampleCount(), INPUT, millis(), numConfigs, pinMode(), Pins, Serial, SPI_MODE1, targetSamples, testConfigs, USE_ADC1, and USE_CHOP.

Variable Documentation

ads126x

ADS126X ads126x

static

Definition at line 20 of file main.cpp.

Referenced by adc_for_connector(), collect_chunk(), collect_chunk_impl(), configureADC(), flush_adc_cycles(), flush_cycles(), flush_cycles(), init_adc_cb(), loop(), on_reference_voltage_cb(), read_data(), read_data(), read_one(), read_single_connector(), run_self_test_cb(), set_connector_rtd(), and setup().

currentConfigIndex

int currentConfigIndex = 0

Definition at line 74 of file main.cpp.

Referenced by loop(), and setup().

noiseAnalyzer

NoiseAnalyzer noiseAnalyzer

Definition at line 21 of file main.cpp.

Referenced by loop(), and printResults().

numConfigs

const int numConfigs = sizeof(testConfigs) / sizeof(testConfigs[0])

Definition at line 73 of file main.cpp.

Referenced by loop(), and setup().

Pins

const Layout& sense_board_pins::Pins

constexpr

Definition at line 161 of file sense_board_pins.h.

Referenced by loop(), SensorHotfire::setup(), and setup().

targetSamples

size_t targetSamples = 0

Definition at line 76 of file main.cpp.

Referenced by loop(), and setup().

testComplete

bool testComplete = false

Definition at line 75 of file main.cpp.

Referenced by loop().

testConfigs

TestConfig testConfigs[]

Initial value:

= {
    
    {ADS126X_SINC1, ADS126X_RATE_2_5, "SINC1", "2.5 SPS", 3},
    {ADS126X_SINC1, ADS126X_RATE_100, "SINC1", "100 SPS", 100},
    {ADS126X_SINC1, ADS126X_RATE_1200, "SINC1", "1200 SPS", 1200},
    {ADS126X_SINC1, ADS126X_RATE_19200, "SINC1", "19200 SPS", 19200},
 
    
    {ADS126X_SINC2, ADS126X_RATE_10, "SINC2", "10 SPS", 10},
    {ADS126X_SINC2, ADS126X_RATE_100, "SINC2", "100 SPS", 100},
    {ADS126X_SINC2, ADS126X_RATE_1200, "SINC2", "1200 SPS", 1200},
 
    
    {ADS126X_SINC3, ADS126X_RATE_10, "SINC3", "10 SPS", 10},
    {ADS126X_SINC3, ADS126X_RATE_100, "SINC3", "100 SPS", 100},
    {ADS126X_SINC3, ADS126X_RATE_1200, "SINC3", "1200 SPS", 1200},
 
    
    {ADS126X_SINC4, ADS126X_RATE_10, "SINC4", "10 SPS", 10},
    {ADS126X_SINC4, ADS126X_RATE_100, "SINC4", "100 SPS", 100},
    {ADS126X_SINC4, ADS126X_RATE_1200, "SINC4", "1200 SPS", 1200},
 
    
    {ADS126X_FIR, ADS126X_RATE_2_5, "FIR", "2.5 SPS", 3},
    {ADS126X_FIR, ADS126X_RATE_10, "FIR", "10 SPS", 10},
    {ADS126X_FIR, ADS126X_RATE_20, "FIR", "20 SPS", 20},
}

Definition at line 33 of file main.cpp.

Referenced by loop(), and setup().