This graph shows which files directly or indirectly include this file:

Macros
#define	BOARD_HEARTBEAT_INTERVAL_MS 1000
#define	LOOP_DELAY_MS 10
#define	SERIAL_MONITOR_READY_DELAY_MS 500
#define	ETHERNET_SPI_DELAY_MS 1000
#define	ETHERNET_INIT_DELAY_MS 1000
#define	ETHERNET_BEGIN_DELAY_MS 1000
#define	SENSOR_ETH_DHCP_TIMEOUT_MS 5000
#define	SENSOR_ETH_DHCP_RESPONSE_TIMEOUT_MS 2000
#define	SENSOR_ETH_DHCP_RETRY_INTERVAL_MS 15000
#define	SENSOR_ETH_DHCP_RETRY_TIMEOUT_MS 3000
#define	SENSOR_ZEROCONF_SERVER_SILENCE_MS 10000
#define	LED_CYCLE_MS 5000
#define	LED_BLINK_ON_MS 100
#define	LED_BLINK_OFF_MS 100
#define	BOARD_ID 21
#define	ENABLE_ALL_STATE_TRANSITIONS false
#define	HOTFIRE_SERVER_IP_OCTET_4 20
#define	HOTFIRE_SERVER_PORT 5006
#define	HOTFIRE_CHUNKS_PER_PACKET 9
#define	HOTFIRE_OTA_PORT 3232

Macro Definition Documentation

◆ BOARD_HEARTBEAT_INTERVAL_MS

#define BOARD_HEARTBEAT_INTERVAL_MS 1000

Definition at line 9 of file hotfire_config.h.

◆ BOARD_ID

#define BOARD_ID 21

Definition at line 54 of file hotfire_config.h.

Referenced by sendHeartbeat(), SensorHotfire::setup(), and setup().

◆ ENABLE_ALL_STATE_TRANSITIONS

#define ENABLE_ALL_STATE_TRANSITIONS false

Definition at line 59 of file hotfire_config.h.

Referenced by applyPacketTransition(), and run_Active().

◆ ETHERNET_BEGIN_DELAY_MS

#define ETHERNET_BEGIN_DELAY_MS 1000

Definition at line 20 of file hotfire_config.h.

◆ ETHERNET_INIT_DELAY_MS

#define ETHERNET_INIT_DELAY_MS 1000

Definition at line 19 of file hotfire_config.h.

◆ ETHERNET_SPI_DELAY_MS

#define ETHERNET_SPI_DELAY_MS 1000

Definition at line 18 of file hotfire_config.h.

◆ HOTFIRE_CHUNKS_PER_PACKET

#define HOTFIRE_CHUNKS_PER_PACKET 9

Definition at line 68 of file hotfire_config.h.

◆ HOTFIRE_OTA_PORT

#define HOTFIRE_OTA_PORT 3232

Definition at line 71 of file hotfire_config.h.

Referenced by setup().

◆ HOTFIRE_SERVER_IP_OCTET_4

#define HOTFIRE_SERVER_IP_OCTET_4 20

Definition at line 64 of file hotfire_config.h.

Referenced by loop(), SensorHotfire::loop(), pollNetwork(), and SensorHotfire::setup().

◆ HOTFIRE_SERVER_PORT

#define HOTFIRE_SERVER_PORT 5006

Definition at line 65 of file hotfire_config.h.

Referenced by loop(), SensorHotfire::loop(), pollNetwork(), sendBoardHeartbeat(), and SensorHotfire::setup().

◆ LED_BLINK_OFF_MS

#define LED_BLINK_OFF_MS 100

Definition at line 50 of file hotfire_config.h.

◆ LED_BLINK_ON_MS

#define LED_BLINK_ON_MS 100

Definition at line 49 of file hotfire_config.h.

◆ LED_CYCLE_MS

#define LED_CYCLE_MS 5000

Definition at line 48 of file hotfire_config.h.

◆ LOOP_DELAY_MS

#define LOOP_DELAY_MS 10

Definition at line 11 of file hotfire_config.h.

◆ SENSOR_ETH_DHCP_RESPONSE_TIMEOUT_MS

#define SENSOR_ETH_DHCP_RESPONSE_TIMEOUT_MS 2000

Definition at line 29 of file hotfire_config.h.

Referenced by BoardNet::begin(), and BoardNet::retryDhcp().

◆ SENSOR_ETH_DHCP_RETRY_INTERVAL_MS

#define SENSOR_ETH_DHCP_RETRY_INTERVAL_MS 15000

Definition at line 34 of file hotfire_config.h.

Referenced by BoardNet::retryDhcp(), test_failed_retry_stays_reflashable(), test_no_retry_during_an_ota(), test_retry_that_gets_a_lease_moves_the_board(), and test_retry_waits_for_the_interval().

◆ SENSOR_ETH_DHCP_RETRY_TIMEOUT_MS

#define SENSOR_ETH_DHCP_RETRY_TIMEOUT_MS 3000

Definition at line 37 of file hotfire_config.h.

Referenced by BoardNet::retryDhcp().

◆ SENSOR_ETH_DHCP_TIMEOUT_MS

#define SENSOR_ETH_DHCP_TIMEOUT_MS 5000

Definition at line 26 of file hotfire_config.h.

Referenced by BoardNet::begin().

◆ SENSOR_ZEROCONF_SERVER_SILENCE_MS

#define SENSOR_ZEROCONF_SERVER_SILENCE_MS 10000

Definition at line 45 of file hotfire_config.h.

Referenced by BoardNet::serverWentSilent(), test_server_silence_only_after_it_was_learned(), and test_server_silence_trips_after_timeout().

◆ SERIAL_MONITOR_READY_DELAY_MS

#define SERIAL_MONITOR_READY_DELAY_MS 500

Definition at line 15 of file hotfire_config.h.

Referenced by SensorHotfire::setup(), and setup().

Macros