Functions
	_cfg ()
	_lay (cfg, drawings=False)
	_codes (out)
	test_spot_facet_is_square_to_the_passage_and_centred_on_its_end (inner)
	test_the_parameters_rebuild_the_designers_revolve_sketch ()
	test_a_parameter_off_the_drawing_is_caught_where_it_is ()
	test_the_drawn_channels_feed_the_manifold_solve ()
	test_a_groove_that_runs_into_a_channel_is_left_out_and_said ()
	test_the_centre_thread_cutting_a_groove_is_flagged ()
	test_a_port_bore_over_a_seal_groove_is_flagged_and_a_smaller_bore_clears_it ()
	test_bending_takes_the_section_as_built ()
	test_without_new_features_the_section_is_the_old_one ()
	test_revolve_view_is_one_closed_profile_up_from_the_face ()
	test_port_view_has_every_port ()
	test_frontend_doublet_fixture_is_current ()
	test_the_flow_solves_geometry_is_the_full_layouts_without_the_checks ()

Variables
	ROOT = Path(__file__).resolve().parents[1]
str	CFG = ROOT / "tests/fixtures/ethalox_6500N_doublet_cad_2026-09-28.yaml"
float	IN = 0.0254
str	FIXTURE = ROOT / "frontend/src/components/__fixtures__/layout_doublet_6500N.json"

Detailed Description

The injector plug's half-section built from its parameters (layout.plate_profile): the drill-spot
channel, back-face grooves, the rim gland, the centre port and the cover plate's feed ports.

The acceptance test is the stand's own plate: built from the numbers in the config it must land
on the designer's revolve sketch (configs/cad/...dxf) to within a thou, everywhere.

Function Documentation

◆ _cfg()

test_injector_plate_profile._cfg ( )

protected

Definition at line 20 of file test_injector_plate_profile.py.

Referenced by test_a_groove_that_runs_into_a_channel_is_left_out_and_said(), test_a_parameter_off_the_drawing_is_caught_where_it_is(), test_a_port_bore_over_a_seal_groove_is_flagged_and_a_smaller_bore_clears_it(), test_bending_takes_the_section_as_built(), test_frontend_doublet_fixture_is_current(), test_port_view_has_every_port(), test_revolve_view_is_one_closed_profile_up_from_the_face(), test_the_centre_thread_cutting_a_groove_is_flagged(), test_the_flow_solves_geometry_is_the_full_layouts_without_the_checks(), and test_the_parameters_rebuild_the_designers_revolve_sketch().

◆ _codes()

test_injector_plate_profile._codes ( out )

protected

Definition at line 29 of file test_injector_plate_profile.py.

Referenced by test_a_groove_that_runs_into_a_channel_is_left_out_and_said(), test_a_parameter_off_the_drawing_is_caught_where_it_is(), test_a_port_bore_over_a_seal_groove_is_flagged_and_a_smaller_bore_clears_it(), test_the_centre_thread_cutting_a_groove_is_flagged(), and test_the_parameters_rebuild_the_designers_revolve_sketch().

◆ _lay()

test_injector_plate_profile._lay	(		cfg,
			drawings = False )

protected

Definition at line 24 of file test_injector_plate_profile.py.

Referenced by test_a_groove_that_runs_into_a_channel_is_left_out_and_said(), test_a_parameter_off_the_drawing_is_caught_where_it_is(), test_a_port_bore_over_a_seal_groove_is_flagged_and_a_smaller_bore_clears_it(), test_bending_takes_the_section_as_built(), test_frontend_doublet_fixture_is_current(), test_port_view_has_every_port(), test_revolve_view_is_one_closed_profile_up_from_the_face(), test_the_centre_thread_cutting_a_groove_is_flagged(), test_the_drawn_channels_feed_the_manifold_solve(), test_the_flow_solves_geometry_is_the_full_layouts_without_the_checks(), test_the_parameters_rebuild_the_designers_revolve_sketch(), and test_without_new_features_the_section_is_the_old_one().

◆ test_a_groove_that_runs_into_a_channel_is_left_out_and_said()

test_injector_plate_profile.test_a_groove_that_runs_into_a_channel_is_left_out_and_said ( )

Definition at line 95 of file test_injector_plate_profile.py.

References _cfg(), _codes(), and _lay().

◆ test_a_parameter_off_the_drawing_is_caught_where_it_is()

test_injector_plate_profile.test_a_parameter_off_the_drawing_is_caught_where_it_is ( )

Definition at line 70 of file test_injector_plate_profile.py.

References _cfg(), _codes(), and _lay().

◆ test_a_port_bore_over_a_seal_groove_is_flagged_and_a_smaller_bore_clears_it()

test_injector_plate_profile.test_a_port_bore_over_a_seal_groove_is_flagged_and_a_smaller_bore_clears_it ( )

Definition at line 114 of file test_injector_plate_profile.py.

References _cfg(), _codes(), and _lay().

◆ test_bending_takes_the_section_as_built()

test_injector_plate_profile.test_bending_takes_the_section_as_built ( )

The grooves thin the section: 19.05 mm of plate, 19.05 - 1.956 mm under the outer groove
(where the face is flat), and under groove 3 the face groove comes off too (1.458 mm).

Definition at line 124 of file test_injector_plate_profile.py.

References _cfg(), and _lay().

◆ test_frontend_doublet_fixture_is_current()

test_injector_plate_profile.test_frontend_doublet_fixture_is_current ( )

Regenerate: python3 scripts/injector_layout.py --no-flows tests/fixtures/ethalox_6500N_doublet_cad_2026-09-28.yaml > <fixture>

Definition at line 175 of file test_injector_plate_profile.py.

References _cfg(), and _lay().

◆ test_port_view_has_every_port()

test_injector_plate_profile.test_port_view_has_every_port ( )

Definition at line 166 of file test_injector_plate_profile.py.

References _cfg(), and _lay().

◆ test_revolve_view_is_one_closed_profile_up_from_the_face()

test_injector_plate_profile.test_revolve_view_is_one_closed_profile_up_from_the_face ( )

Definition at line 155 of file test_injector_plate_profile.py.

References _cfg(), _lay(), max, and min.

◆ test_spot_facet_is_square_to_the_passage_and_centred_on_its_end()

test_injector_plate_profile.test_spot_facet_is_square_to_the_passage_and_centred_on_its_end ( inner )

Definition at line 36 of file test_injector_plate_profile.py.

References max, and min.

◆ test_the_centre_thread_cutting_a_groove_is_flagged()

test_injector_plate_profile.test_the_centre_thread_cutting_a_groove_is_flagged ( )

Definition at line 106 of file test_injector_plate_profile.py.

References _cfg(), _codes(), and _lay().

◆ test_the_drawn_channels_feed_the_manifold_solve()

test_injector_plate_profile.test_the_drawn_channels_feed_the_manifold_solve ( )

Definition at line 83 of file test_injector_plate_profile.py.

References _lay().

◆ test_the_flow_solves_geometry_is_the_full_layouts_without_the_checks()

test_injector_plate_profile.test_the_flow_solves_geometry_is_the_full_layouts_without_the_checks ( )

The injector solve reads channel sections dozens of times per operating point; it takes the
layout without the plate-bending check and drawing comparison (80 % of a solve before). The
channels must be the same ones the full layout draws.

Definition at line 186 of file test_injector_plate_profile.py.

References _cfg(), and _lay().

◆ test_the_parameters_rebuild_the_designers_revolve_sketch()

test_injector_plate_profile.test_the_parameters_rebuild_the_designers_revolve_sketch ( )

Definition at line 60 of file test_injector_plate_profile.py.

References _cfg(), _codes(), and _lay().

◆ test_without_new_features_the_section_is_the_old_one()

test_injector_plate_profile.test_without_new_features_the_section_is_the_old_one ( )

Opt-in: a plate that declares no grooves, gland or ports has the section the bending
check used before (face surface down to the channel floor).

Definition at line 137 of file test_injector_plate_profile.py.

References _lay(), max, and min.

Variable Documentation

◆ CFG

str test_injector_plate_profile.CFG = ROOT / "tests/fixtures/ethalox_6500N_doublet_cad_2026-09-28.yaml"

Definition at line 16 of file test_injector_plate_profile.py.

◆ FIXTURE

str test_injector_plate_profile.FIXTURE = ROOT / "frontend/src/components/__fixtures__/layout_doublet_6500N.json"

Definition at line 172 of file test_injector_plate_profile.py.

◆ IN

float test_injector_plate_profile.IN = 0.0254

Definition at line 17 of file test_injector_plate_profile.py.

◆ ROOT

test_injector_plate_profile.ROOT = Path(__file__).resolve().parents[1]

Definition at line 15 of file test_injector_plate_profile.py.

Functions

Variables

Detailed Description

Function Documentation

◆ _cfg()

◆ _codes()

◆ _lay()

◆ test_a_groove_that_runs_into_a_channel_is_left_out_and_said()

◆ test_a_parameter_off_the_drawing_is_caught_where_it_is()

◆ test_a_port_bore_over_a_seal_groove_is_flagged_and_a_smaller_bore_clears_it()

◆ test_bending_takes_the_section_as_built()

◆ test_frontend_doublet_fixture_is_current()

◆ test_port_view_has_every_port()

◆ test_revolve_view_is_one_closed_profile_up_from_the_face()

◆ test_spot_facet_is_square_to_the_passage_and_centred_on_its_end()

◆ test_the_centre_thread_cutting_a_groove_is_flagged()

◆ test_the_drawn_channels_feed_the_manifold_solve()

◆ test_the_flow_solves_geometry_is_the_full_layouts_without_the_checks()

◆ test_the_parameters_rebuild_the_designers_revolve_sketch()

◆ test_without_new_features_the_section_is_the_old_one()

Variable Documentation

◆ CFG

◆ FIXTURE

◆ IN

◆ ROOT