Header file of PWR HAL Extension module. More...

#include "stm32h7xx_hal_def.h"

Include dependency graph for stm32h7xx_hal_pwr_ex.h:

This graph shows which files directly or indirectly include this file:

Classes
struct	PWREx_AVDTypeDef
	PWREx AVD configuration structure definition. More...
struct	PWREx_WakeupPinTypeDef
	PWREx Wakeup pin configuration structure definition. More...

Macros
#define	PWR_WAKEUP_PIN6 PWR_WKUPEPR_WKUPEN6
#define	PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4
#define	PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2
#define	PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1
#define	PWR_WAKEUP_PIN6_HIGH PWR_WKUPEPR_WKUPEN6
#define	PWR_WAKEUP_PIN4_HIGH PWR_WKUPEPR_WKUPEN4
#define	PWR_WAKEUP_PIN2_HIGH PWR_WKUPEPR_WKUPEN2
#define	PWR_WAKEUP_PIN1_HIGH PWR_WKUPEPR_WKUPEN1
#define	PWR_WAKEUP_PIN6_LOW (PWR_WKUPEPR_WKUPP6 \| PWR_WKUPEPR_WKUPEN6)
#define	PWR_WAKEUP_PIN4_LOW (PWR_WKUPEPR_WKUPP4 \| PWR_WKUPEPR_WKUPEN4)
#define	PWR_WAKEUP_PIN2_LOW (PWR_WKUPEPR_WKUPP2 \| PWR_WKUPEPR_WKUPEN2)
#define	PWR_WAKEUP_PIN1_LOW (PWR_WKUPEPR_WKUPP1 \| PWR_WKUPEPR_WKUPEN1)
#define	PWR_PIN_POLARITY_HIGH (0x00000000U)
#define	PWR_PIN_POLARITY_LOW (0x00000001U)
#define	PWR_PIN_NO_PULL (0x00000000U)
#define	PWR_PIN_PULL_UP (0x00000001U)
#define	PWR_PIN_PULL_DOWN (0x00000002U)
#define	PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1
	Wakeup flag on PA0.
#define	PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2
	Wakeup flag on PA2.
#define	PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4
	Wakeup flag on PC13.
#define	PWR_WAKEUP_FLAG6 PWR_WKUPFR_WKUPF6
	Wakeup flag on PC1.
#define	PWR_WAKEUP_FLAG_ALL
#define	PWR_D1_DOMAIN (0x00000000U)
#define	PWR_D3_DOMAIN (0x00000002U)
#define	PWR_CPU_FLAGS (0x00000000U)
#define	PWR_D3_DOMAIN_STOP (0x00000000U)
#define	PWR_D3_DOMAIN_RUN (0x00000800U)
#define	PWR_LDO_SUPPLY PWR_CR3_LDOEN
	Core domains are supplied from the LDO.
#define	PWR_EXTERNAL_SOURCE_SUPPLY PWR_CR3_BYPASS
	The SMPS disabled and the LDO Bypass.
#define	PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SCUEN \| PWR_CR3_LDOEN \| PWR_CR3_BYPASS)
#define	PWR_AVDLEVEL_0 PWR_CR1_ALS_LEV0
	Analog voltage detector level 0 selection : 1V7.
#define	PWR_AVDLEVEL_1 PWR_CR1_ALS_LEV1
	Analog voltage detector level 1 selection : 2V1.
#define	PWR_AVDLEVEL_2 PWR_CR1_ALS_LEV2
	Analog voltage detector level 2 selection : 2V5.
#define	PWR_AVDLEVEL_3 PWR_CR1_ALS_LEV3
	Analog voltage detector level 3 selection : 2V8.
#define	PWR_AVD_MODE_NORMAL (0x00000000U)
	Basic mode is used.
#define	PWR_AVD_MODE_IT_RISING (0x00010001U)
	External Interrupt Mode with Rising edge trigger detection.
#define	PWR_AVD_MODE_IT_FALLING (0x00010002U)
	External Interrupt Mode with Falling edge trigger detection.
#define	PWR_AVD_MODE_IT_RISING_FALLING (0x00010003U)
	External Interrupt Mode with Rising/Falling edge trigger detection.
#define	PWR_AVD_MODE_EVENT_RISING (0x00020001U)
	Event Mode with Rising edge trigger detection.
#define	PWR_AVD_MODE_EVENT_FALLING (0x00020002U)
	Event Mode with Falling edge trigger detection.
#define	PWR_AVD_MODE_EVENT_RISING_FALLING (0x00020003U)
	Event Mode with Rising/Falling edge trigger detection.
#define	PWR_REGULATOR_SVOS_SCALE5 (PWR_CR1_SVOS_0)
#define	PWR_REGULATOR_SVOS_SCALE4 (PWR_CR1_SVOS_1)
#define	PWR_REGULATOR_SVOS_SCALE3 (PWR_CR1_SVOS_0 \| PWR_CR1_SVOS_1)
#define	PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000U)
	VBAT charging through a 5 kOhms resistor.
#define	PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR3_VBRS
	VBAT charging through a 1.5 kOhms resistor.
#define	PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U)
#define	PWR_VBAT_BELOW_LOW_THRESHOLD PWR_CR2_VBATL
#define	PWR_VBAT_ABOVE_HIGH_THRESHOLD PWR_CR2_VBATH
#define	PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U)
#define	PWR_TEMP_BELOW_LOW_THRESHOLD PWR_CR2_TEMPL
#define	PWR_TEMP_ABOVE_HIGH_THRESHOLD PWR_CR2_TEMPH
#define	PWR_EXTI_LINE_AVD EXTI_IMR1_IM16
	External interrupt line 16 Connected to the AVD EXTI Line.
#define	__HAL_PWR_AVD_EXTI_ENABLE_IT()
	Enable the AVD EXTI Line 16.
#define	__HAL_PWR_AVD_EXTI_DISABLE_IT()
	Disable the AVD EXTI Line 16.
#define	__HAL_PWR_AVD_EXTI_ENABLE_EVENT()
	Enable event on AVD EXTI Line 16.
#define	__HAL_PWR_AVD_EXTI_DISABLE_EVENT()
	Disable event on AVD EXTI Line 16.
#define	__HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE()
	Enable the AVD Extended Interrupt Rising Trigger.
#define	__HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE()
	Disable the AVD Extended Interrupt Rising Trigger.
#define	__HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE()
	Enable the AVD Extended Interrupt Falling Trigger.
#define	__HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE()
	Disable the AVD Extended Interrupt Falling Trigger.
#define	__HAL_PWR_AVD_EXTI_ENABLE_RISING_FALLING_EDGE()
	Enable the AVD Extended Interrupt Rising and Falling Trigger.
#define	__HAL_PWR_AVD_EXTI_DISABLE_RISING_FALLING_EDGE()
	Disable the AVD Extended Interrupt Rising & Falling Trigger.
#define	__HAL_PWR_AVD_EXTI_GET_FLAG()
	Check whether the specified AVD EXTI interrupt flag is set or not.
#define	__HAL_PWR_AVD_EXTI_CLEAR_FLAG()
	Clear the AVD EXTI flag.
#define	__HAL_PWR_AVD_EXTI_GENERATE_SWIT()
	Generates a Software interrupt on AVD EXTI line.
#define	IS_PWR_SUPPLY(PWR_SOURCE)
#define	IS_PWR_STOP_MODE_REGULATOR_VOLTAGE(VOLTAGE)
#define	IS_PWR_DOMAIN(DOMAIN)
#define	IS_D3_STATE(STATE)
#define	IS_PWR_WAKEUP_PIN(PIN)
#define	IS_PWR_WAKEUP_PIN_POLARITY(POLARITY)
#define	IS_PWR_WAKEUP_PIN_PULL(PULL)
#define	IS_PWR_WAKEUP_FLAG(FLAG)
#define	IS_PWR_AVD_LEVEL(LEVEL)
#define	IS_PWR_AVD_MODE(MODE)
#define	IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR)
#define	IS_PWR_D1_CPU(CPU)

Functions
HAL_StatusTypeDef	HAL_PWREx_ConfigSupply (uint32_t SupplySource)
uint32_t	HAL_PWREx_GetSupplyConfig (void)
HAL_StatusTypeDef	HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling)
uint32_t	HAL_PWREx_GetVoltageRange (void)
HAL_StatusTypeDef	HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling)
uint32_t	HAL_PWREx_GetStopModeVoltageRange (void)
void	HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain)
void	HAL_PWREx_EnterSTANDBYMode (uint32_t Domain)
void	HAL_PWREx_ConfigD3Domain (uint32_t D3State)
void	HAL_PWREx_ClearPendingEvent (void)
void	HAL_PWREx_EnableFlashPowerDown (void)
void	HAL_PWREx_DisableFlashPowerDown (void)
void	HAL_PWREx_EnableWakeUpPin (const PWREx_WakeupPinTypeDef *sPinParams)
void	HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin)
uint32_t	HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag)
HAL_StatusTypeDef	HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag)
void	HAL_PWREx_WAKEUP_PIN_IRQHandler (void)
void	HAL_PWREx_WKUP1_Callback (void)
void	HAL_PWREx_WKUP2_Callback (void)
void	HAL_PWREx_WKUP4_Callback (void)
void	HAL_PWREx_WKUP6_Callback (void)
HAL_StatusTypeDef	HAL_PWREx_EnableBkUpReg (void)
HAL_StatusTypeDef	HAL_PWREx_DisableBkUpReg (void)
HAL_StatusTypeDef	HAL_PWREx_EnableUSBReg (void)
HAL_StatusTypeDef	HAL_PWREx_DisableUSBReg (void)
void	HAL_PWREx_EnableUSBVoltageDetector (void)
void	HAL_PWREx_DisableUSBVoltageDetector (void)
void	HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue)
void	HAL_PWREx_DisableBatteryCharging (void)
void	HAL_PWREx_EnableMonitoring (void)
void	HAL_PWREx_DisableMonitoring (void)
uint32_t	HAL_PWREx_GetTemperatureLevel (void)
uint32_t	HAL_PWREx_GetVBATLevel (void)
void	HAL_PWREx_ConfigAVD (const PWREx_AVDTypeDef *sConfigAVD)
void	HAL_PWREx_EnableAVD (void)
void	HAL_PWREx_DisableAVD (void)
void	HAL_PWREx_PVD_AVD_IRQHandler (void)
void	HAL_PWREx_AVDCallback (void)

Detailed Description

Header file of PWR HAL Extension module.

Author: MCD Application Team

Attention

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.

Definition in file stm32h7xx_hal_pwr_ex.h.

Classes

Macros

Functions

Detailed Description