STAR
Cal STAR — firmware, DAQ server, and engine design
Loading...
Searching...
No Matches
RCC_OscInitTypeDef Struct Reference
STM32H7xx_HAL_Driver » RCC » RCC Exported Types

RCC Internal/External Oscillator (HSE, HSI, CSI, LSE and LSI) configuration structure definition. More...

#include <stm32h7xx_hal_rcc.h>

Collaboration diagram for RCC_OscInitTypeDef:
[legend]

Public Attributes

uint32_t OscillatorType
 The oscillators to be configured.
uint32_t HSEState
 The new state of the HSE.
uint32_t LSEState
 The new state of the LSE.
uint32_t HSIState
 The new state of the HSI.
uint32_t HSICalibrationValue
 The calibration trimming value.
uint32_t LSIState
 The new state of the LSI.
uint32_t HSI48State
 The new state of the HSI48.
uint32_t CSIState
 The new state of the CSI.
uint32_t CSICalibrationValue
 The calibration trimming value.
RCC_PLLInitTypeDef PLL
 PLL structure parameters.

Detailed Description

RCC Internal/External Oscillator (HSE, HSI, CSI, LSE and LSI) configuration structure definition.

Definition at line 84 of file stm32h7xx_hal_rcc.h.

Member Data Documentation

◆ CSICalibrationValue

uint32_t RCC_OscInitTypeDef::CSICalibrationValue

The calibration trimming value.

This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F for STM32H7 rev.Y This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F for STM32H7 rev.B and above

Definition at line 111 of file stm32h7xx_hal_rcc.h.

◆ CSIState

uint32_t RCC_OscInitTypeDef::CSIState

The new state of the CSI.

This parameter can be a value of RCC CSI Config

Definition at line 108 of file stm32h7xx_hal_rcc.h.

◆ HSEState

uint32_t RCC_OscInitTypeDef::HSEState

The new state of the HSE.

This parameter can be a value of RCC HSE Config

Definition at line 89 of file stm32h7xx_hal_rcc.h.

◆ HSI48State

uint32_t RCC_OscInitTypeDef::HSI48State

The new state of the HSI48.

This parameter can be a value of RCC HSI48 Config

Definition at line 105 of file stm32h7xx_hal_rcc.h.

Referenced by SystemClock_Config().

◆ HSICalibrationValue

uint32_t RCC_OscInitTypeDef::HSICalibrationValue

The calibration trimming value.

This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F for STM32H7 rev.Y This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F for STM32H7 rev.B and above

Definition at line 98 of file stm32h7xx_hal_rcc.h.

Referenced by SystemClock_Config().

◆ HSIState

uint32_t RCC_OscInitTypeDef::HSIState

The new state of the HSI.

This parameter can be a value of RCC HSI Config

Definition at line 95 of file stm32h7xx_hal_rcc.h.

Referenced by SystemClock_Config().

◆ LSEState

uint32_t RCC_OscInitTypeDef::LSEState

The new state of the LSE.

This parameter can be a value of RCC LSE Config

Definition at line 92 of file stm32h7xx_hal_rcc.h.

◆ LSIState

uint32_t RCC_OscInitTypeDef::LSIState

The new state of the LSI.

This parameter can be a value of RCC LSI Config

Definition at line 102 of file stm32h7xx_hal_rcc.h.

Referenced by SystemClock_Config().

◆ OscillatorType

uint32_t RCC_OscInitTypeDef::OscillatorType

The oscillators to be configured.

This parameter can be a value of RCC Oscillator Type

Definition at line 86 of file stm32h7xx_hal_rcc.h.

Referenced by SystemClock_Config().

◆ PLL

RCC_PLLInitTypeDef RCC_OscInitTypeDef::PLL

PLL structure parameters.

Definition at line 115 of file stm32h7xx_hal_rcc.h.

Referenced by SystemClock_Config().

The documentation for this struct was generated from the following file: