RTC Configuration Structure definition. More...

#include <stm32h7xx_hal_rtc.h>

Public Attributes
uint32_t	HourFormat
	Specifies the RTC Hour Format.
uint32_t	AsynchPrediv
	Specifies the RTC Asynchronous Predivider value.
uint32_t	SynchPrediv
	Specifies the RTC Synchronous Predivider value.
uint32_t	OutPut
	Specifies which signal will be routed to the RTC output.
uint32_t	OutPutRemap
	Specifies the remap for RTC output.
uint32_t	OutPutPolarity
	Specifies the polarity of the output signal.
uint32_t	OutPutType
	Specifies the RTC Output Pin mode.

Detailed Description

RTC Configuration Structure definition.

Definition at line 59 of file stm32h7xx_hal_rtc.h.

Member Data Documentation

◆ AsynchPrediv

uint32_t RTC_InitTypeDef::AsynchPrediv

Specifies the RTC Asynchronous Predivider value.

This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F

Definition at line 64 of file stm32h7xx_hal_rtc.h.

◆ HourFormat

uint32_t RTC_InitTypeDef::HourFormat

Specifies the RTC Hour Format.

This parameter can be a value of RTC Hour Formats Definitions

Definition at line 61 of file stm32h7xx_hal_rtc.h.

◆ OutPut

uint32_t RTC_InitTypeDef::OutPut

Specifies which signal will be routed to the RTC output.

This parameter can be a value of RTC Output Selection Definitions

Definition at line 70 of file stm32h7xx_hal_rtc.h.

◆ OutPutPolarity

uint32_t RTC_InitTypeDef::OutPutPolarity

Specifies the polarity of the output signal.

This parameter can be a value of RTC Output Polarity Definitions

Definition at line 76 of file stm32h7xx_hal_rtc.h.

◆ OutPutRemap

uint32_t RTC_InitTypeDef::OutPutRemap

Specifies the remap for RTC output.

This parameter can be a value of RTC Output ALARM OUT Remap

Definition at line 73 of file stm32h7xx_hal_rtc.h.

◆ OutPutType

uint32_t RTC_InitTypeDef::OutPutType

Specifies the RTC Output Pin mode.

This parameter can be a value of RTC Output Type ALARM OUT

Definition at line 79 of file stm32h7xx_hal_rtc.h.

◆ SynchPrediv

uint32_t RTC_InitTypeDef::SynchPrediv

Specifies the RTC Synchronous Predivider value.

This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF

Definition at line 67 of file stm32h7xx_hal_rtc.h.

The documentation for this struct was generated from the following file:

firmware/Flight_Computer/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rtc.h

Public Attributes