#include <SensorHotfireCore.h>

Collaboration diagram for SensorHotfire::Config:

Public Attributes
const char *	board_name
const sense_board_pins::Layout *	pins
void(*	init_adc )(void *user_data)
void(*	collect_chunk )(void *user_data)
void(*	send_chunks_to )(void *user_data, IPAddress dest_ip, int dest_port, bool also_to_abort_controller, IPAddress abort_controller_ip, int abort_controller_port)
	Send collected chunks to primary dest; if also_to_abort_controller then send same data to abort_controller_ip:port as well, then drain.
void(*	on_reference_voltage_config )(void *user_data, uint8_t reference_voltage)
	Called when SENSOR_CONFIG is received with reference_voltage byte (0=2.5V internal, 1=VDD, 2=ignore).
void(*	run_self_test )(void *user_data, const StoredSensorConfig &config, std::vector< daq::SelfTestResult > &results_out)
	Called once when entering SelfTest state.
void *	user_data

Detailed Description

Definition at line 74 of file SensorHotfireCore.h.

Member Data Documentation

◆ board_name

const char* SensorHotfire::Config::board_name

Definition at line 75 of file SensorHotfireCore.h.

◆ collect_chunk

void(* SensorHotfire::Config::collect_chunk) (void *user_data)

Definition at line 78 of file SensorHotfireCore.h.

◆ init_adc

void(* SensorHotfire::Config::init_adc) (void *user_data)

Definition at line 77 of file SensorHotfireCore.h.

◆ on_reference_voltage_config

void(* SensorHotfire::Config::on_reference_voltage_config) (void *user_data, uint8_t reference_voltage)

Called when SENSOR_CONFIG is received with reference_voltage byte (0=2.5V internal, 1=VDD, 2=ignore).

Definition at line 87 of file SensorHotfireCore.h.

◆ pins

const sense_board_pins::Layout* SensorHotfire::Config::pins

Definition at line 76 of file SensorHotfireCore.h.

◆ run_self_test

void(* SensorHotfire::Config::run_self_test) (void *user_data, const StoredSensorConfig &config, std::vector< daq::SelfTestResult > &results_out)

Called once when entering SelfTest state.

Performs ADC self-test and connector continuity check, fills results_out. After return, core sends the SELF_TEST packet and goes to Active.

Definition at line 95 of file SensorHotfireCore.h.

◆ send_chunks_to

void(* SensorHotfire::Config::send_chunks_to) (void *user_data, IPAddress dest_ip, int dest_port, bool also_to_abort_controller, IPAddress abort_controller_ip, int abort_controller_port)

Send collected chunks to primary dest; if also_to_abort_controller then send same data to abort_controller_ip:port as well, then drain.

Definition at line 81 of file SensorHotfireCore.h.

◆ user_data

void* SensorHotfire::Config::user_data

Definition at line 97 of file SensorHotfireCore.h.

The documentation for this struct was generated from the following file:

firmware/Hotfire_Code/common/SensorHotfireCore.h

Public Attributes