test_comps_geometry.py File Reference

Go to the source code of this file.

Namespaces
namespace	test_comps_geometry

Functions
object	test_comps_geometry.lox ()
object	test_comps_geometry._bend (**Param overrides)
object	test_comps_geometry._hose (dict[str, Param]|None params=None, **object kwargs)
None	test_comps_geometry.test_bend_resistance_depends_on_how_tight_the_bend_is (object lox)
None	test_comps_geometry.test_bend_loss_has_a_minimum_near_three_diameters (object lox)
None	test_comps_geometry.test_a_bend_inside_its_minimum_radius_is_reported_not_enforced (object lox)
None	test_comps_geometry.test_a_bend_within_its_limit_reports_nothing ()
None	test_comps_geometry.test_no_limit_declared_means_no_claim ()
None	test_comps_geometry.test_routing_a_hose_tighter_costs_pressure (object lox)
None	test_comps_geometry.test_convoluted_hose_is_far_lossier_than_smooth_bore (object lox)
None	test_comps_geometry.test_end_fittings_are_reported_separately (object lox)
None	test_comps_geometry.test_static_and_dynamic_bend_limits_are_distinguished ()
None	test_comps_geometry.test_breaking_the_static_limit_is_an_error ()
None	test_comps_geometry.test_a_straight_hose_has_no_bend_to_check ()
None	test_comps_geometry.test_hose_defaults_are_flagged_as_assumptions ()

Variables
	test_comps_geometry.M = Provenance.MANUFACTURER
float	test_comps_geometry.BORE_MM = 7.75