test_layerx.py File Reference

Go to the source code of this file.

Namespaces
namespace	test_layerx

Functions
	test_layerx.config ()
	test_layerx.runner (config)
Drawing	test_layerx.drawing ()
	test_layerx.prepared (config, runner, drawing)
	test_layerx._check (prep, key)
	test_layerx.test_dome_dial_matches_the_regulator_relation_by_hand (prepared, drawing)
	test_layerx.test_the_engine_boundary_says_its_drop_is_at_lossless_lines (prepared)
	test_layerx.test_t0_fit_reproduces_enginedesign_at_t0 (config, runner, drawing)
	test_layerx.test_the_line_exit_loses_exactly_the_borda_dump (config)
	test_layerx.test_the_card_matches_enginedesign_on_solves_it_never_saw (prepared, config)
	test_layerx.test_a_card_for_another_engine_fails_its_check (prepared, config)
	test_layerx.test_native_engine_is_not_enginedesign (config, runner, drawing)
	test_layerx.test_preflight_refuses_a_load_that_does_not_fit (config, runner, drawing)
	test_layerx.test_preflight_refuses_a_drawing_without_the_engines_fuel (config, runner, drawing)
	test_layerx.test_settings_ignore_unknown_keys_and_nulls ()
	test_layerx.burned (prepared, runner)
	test_layerx.burned_static (prepared)
	test_layerx.test_a_burn_conserves_propellant (burned, prepared, config)
	test_layerx.test_the_tank_that_runs_dry_is_the_one_the_load_says (burned, config)
	test_layerx.test_a_card_burn_runs_enginedesigns_engine_all_the_way (burned_static)
	test_layerx.test_the_replay_loop_needs_its_feedback_and_closes (burned)
	test_layerx.test_delivered_numbers_are_the_replays (burned)
	test_layerx.test_the_hand_off_is_what_forward_and_flight_read (burned)
	test_layerx.test_a_burn_starts_at_its_lockup_and_reports_its_provenance (burned, drawing)
	test_layerx.test_the_api_runs_a_burn (config, drawing, monkeypatch, tmp_path)

Variables
	test_layerx.feedtwin = pytest.importorskip("feedtwin", reason="lib/feedtwin is not installed (pip install -e ../lib/feedtwin)")
str	test_layerx.FIXTURE = Path(__file__).parent / "fixtures" / "ethalox_6500N_doublet_cad_2026-09-28.yaml"
str	test_layerx.GN2 = "copv_study_gn2"
	test_layerx.pytestmark