test_layerx_phase5.py File Reference

Go to the source code of this file.

Namespaces
namespace	test_layerx_phase5

Functions
	test_layerx_phase5.config ()
	test_layerx_phase5.drawing ()
Override	test_layerx_phase5.droop (float value, uncertainty=None)
	test_layerx_phase5.test_an_override_lands_in_the_drawing_with_its_provenance (drawing)
	test_layerx_phase5.test_the_restatement_table_reads_and_takes_absolute_pressures_in_psia (drawing)
	test_layerx_phase5.test_a_restated_parameter_reaches_the_twin_as_measured (config, drawing)
	test_layerx_phase5.test_the_store_wants_a_source_and_one_value_per_parameter (tmp_path)
	test_layerx_phase5.test_a_measured_uncertainty_replaces_the_default_range (config, drawing)
	test_layerx_phase5.sweep (config, drawing)
	test_layerx_phase5._case (sweep, key, side)
	test_layerx_phase5.test_the_sweep_runs_every_factor (sweep)
	test_layerx_phase5.test_impulse_is_blind_to_the_feed_and_thrust_is_not (sweep)
	test_layerx_phase5.test_the_band_is_told_each_way (sweep)
	test_layerx_phase5.test_nozzle_efficiency_moves_thrust_and_nothing_upstream (sweep)
	test_layerx_phase5.test_worse_mixing_costs_impulse_and_more_cd_flows_faster (sweep)
	test_layerx_phase5.test_a_measured_engine_input_reaches_the_card (config)
	test_layerx_phase5.test_restatements_follow_the_drawing_through_an_edit (tmp_path, drawing)

Variables
	test_layerx_phase5.reason
str	test_layerx_phase5.FIXTURE = Path(__file__).parent / "fixtures" / "ethalox_6500N_doublet_cad_2026-09-28.yaml"
str	test_layerx_phase5.GN2 = "copv_study_gn2"
list	test_layerx_phase5.pytestmark