test_layerx_phase6.py File Reference

Go to the source code of this file.

Namespaces
namespace	test_layerx_phase6

Functions
	test_layerx_phase6.config ()
	test_layerx_phase6.drawing ()
float	test_layerx_phase6._line_head (prep, str edge_id)
	test_layerx_phase6.test_off_by_default_no_line_heads (config, drawing)
	test_layerx_phase6.test_flying_adds_no_geometry_to_the_drawing (config, drawing)
	test_layerx_phase6._with_heights (drawing, heights)
	test_layerx_phase6.test_a_drawn_or_restated_height_is_the_head (config, drawing)
	test_layerx_phase6.test_a_line_that_falls_further_than_it_is_long_is_flagged (config, drawing)
	test_layerx_phase6.test_the_acceleration_at_liftoff_is_thrust_over_mass (config)
	test_layerx_phase6.test_change_between_histories ()
	test_layerx_phase6.test_flown_the_fuel_side_gains_the_head (config, drawing)
	test_layerx_phase6.test_the_flight_follows_the_end_of_the_curve (config)

Variables
	test_layerx_phase6.reason
str	test_layerx_phase6.FIXTURE = Path(__file__).parent / "fixtures" / "ethalox_6500N_doublet_cad_2026-09-28.yaml"
str	test_layerx_phase6.GN2 = "copv_study_gn2"
	test_layerx_phase6.pytestmark
float	test_layerx_phase6.G0 = 9.80665