|
| dict[str, object] | test_pid_drawn_freely.P (float value, str unit, str source="measured") |
| dict[str, object] | test_pid_drawn_freely.node (str nid, str ctype, str label, **object data) |
| dict[str, object] | test_pid_drawn_freely.line (str eid, str a, str b, str from_port="", str to_port="") |
| Any | test_pid_drawn_freely.press_leg (*dict[str, object] lines, dict[str, Any]|None sol=None) |
| | test_pid_drawn_freely.built (Any payload) |
| None | test_pid_drawn_freely.test_a_press_line_drawn_from_the_tank_lands_on_the_valves_other_side () |
| None | test_pid_drawn_freely.test_the_same_holds_when_both_lines_are_drawn_out_of_the_valve () |
| None | test_pid_drawn_freely.test_reading_the_ports_says_so () |
| None | test_pid_drawn_freely.test_a_valve_with_lines_on_both_sides_is_read_exactly_as_before () |
| Any | test_pid_drawn_freely._through (str ctype, *dict[str, object] lines) |
| float | test_pid_drawn_freely._flow (Any payload) |
| None | test_pid_drawn_freely.test_a_directed_valve_dragged_against_the_flow_reads_its_ports (str ctype) |
| None | test_pid_drawn_freely.test_a_directed_valve_drawn_in_flow_order_is_read_as_before (str ctype) |
| None | test_pid_drawn_freely.test_a_check_valve_drawn_backwards_checks_the_flow () |
| None | test_pid_drawn_freely.test_without_ports_a_one_sided_valve_is_still_a_vent () |
| None | test_pid_drawn_freely.test_a_fill_disconnect_left_capped_does_not_crash_the_solve () |
| None | test_pid_drawn_freely.test_a_part_the_library_refuses_is_named_and_fails_the_assembly () |
| None | test_pid_drawn_freely.test_a_tank_full_of_gas_is_told_to_be_a_pressurant_bottle () |
| Any | test_pid_drawn_freely._stand_with_copv_tank (bool temperature) |
| | test_pid_drawn_freely._open (Any payload) |
| None | test_pid_drawn_freely.test_a_copv_drawn_as_a_tank_is_read_as_the_pressurant_supply () |
| None | test_pid_drawn_freely.test_a_bottle_with_no_volume_is_the_stands_copv_not_a_k_bottle () |
| None | test_pid_drawn_freely.test_a_tank_that_only_forgot_its_temperature_is_not_reread_and_says_why () |
| ( None) | test_pid_drawn_freely.test_a_capped_fitting_behind_a_shut_valve_does_not_make_the_solve_singular () |
| None | test_pid_drawn_freely.test_a_relief_valve_with_no_set_pressure_is_shut_not_a_hole () |
| None | test_pid_drawn_freely.test_the_engine_symbols_chamber_pressure_is_its_boundary () |
| Any | test_pid_drawn_freely._le4_like (str fuel_main_label="FM-R") |
| | test_pid_drawn_freely._machine () |
| None | test_pid_drawn_freely.test_each_commandable_valves_job_is_read_off_the_plumbing () |
| None | test_pid_drawn_freely.test_a_motorized_main_valve_has_the_same_job_as_a_rotary_one () |
| None | test_pid_drawn_freely.test_valves_the_names_do_not_match_are_bound_by_what_they_do () |
| None | test_pid_drawn_freely.test_a_name_that_matches_still_wins_over_a_role () |
| None | test_pid_drawn_freely.test_a_role_two_valves_share_binds_neither () |
| None | test_pid_drawn_freely.test_a_dome_nothing_loads_is_the_operators_setting () |
| Any | test_pid_drawn_freely._le4_with_top_manifold (*, bool vent_valve=False, int rotation=0) |
| str | test_pid_drawn_freely._tank_end (b, str edge_id, str tank) |
| None | test_pid_drawn_freely.test_a_manifold_on_a_tanks_top_port_is_on_its_ullage () |
| None | test_pid_drawn_freely.test_a_turned_tanks_ports_say_nothing_about_up () |
| None | test_pid_drawn_freely.test_a_capped_disconnect_on_an_unvented_tank_top_is_its_gse_vent () |
| None | test_pid_drawn_freely.test_a_drawn_vent_valve_leaves_the_disconnect_capped () |
| None | test_pid_drawn_freely.test_ox_fill_vents_through_the_gse_disconnect () |
| Any | test_pid_drawn_freely._sizeless (Any payload, *str edge_ids) |
| None | test_pid_drawn_freely.test_a_line_with_no_size_is_a_direct_connection () |
| None | test_pid_drawn_freely.test_a_direct_line_into_the_engine_starts_the_injector_leg_at_the_valve () |
| None | test_pid_drawn_freely.test_a_line_with_half_a_size_takes_the_fallback_for_the_rest_and_says_so () |
| None | test_pid_drawn_freely.test_two_fixed_pressures_joined_directly_stay_a_line () |
| None | test_pid_drawn_freely.test_a_segment_with_a_zero_bore_is_reported () |
| None | test_pid_drawn_freely.test_a_line_bore_of_zero_is_said () |
| None | test_pid_drawn_freely.test_a_stretch_with_no_bore_on_a_bored_run_is_sized_at_the_run_and_said () |
| None | test_pid_drawn_freely.test_a_K_with_no_bore_to_refer_it_to_is_said () |
| None | test_pid_drawn_freely.test_two_tanks_on_one_direct_press_manifold_conserve_pressurant () |
1.15.0