test_plate_dxf.py File Reference

Go to the source code of this file.

Namespaces
namespace	test_plate_dxf

Functions
	test_plate_dxf._s (a)
	test_plate_dxf._c (a)
	test_plate_dxf._geometry ()
	test_plate_dxf._write (path, loop)
	test_plate_dxf.synthetic (tmp_path)
	test_plate_dxf.test_the_plate_and_its_channels_come_back_from_the_lines (synthetic)
	test_plate_dxf.test_passages_run_from_facet_to_flank_at_the_jet_angle (synthetic)
	test_plate_dxf.test_a_jet_angle_the_drawing_does_not_carry_locates_nothing (synthetic)
	test_plate_dxf.test_section_thickness_is_the_metal_on_the_axial_line (synthetic)
	test_plate_dxf.test_an_open_profile_is_refused (tmp_path)
	test_plate_dxf.test_the_shipped_drawing_against_hand_numbers ()
	test_plate_dxf._cfg ()
	test_plate_dxf.test_layout_takes_the_drawing_and_flags_what_the_config_contradicts ()
	test_plate_dxf.test_ring_manifold_uses_the_drawn_section ()

Variables
	test_plate_dxf.ezdxf = pytest.importorskip("ezdxf")
float	test_plate_dxf.IN = 0.0254
str	test_plate_dxf.DRAWING = "configs/cad/ethalox_6500N_injector_revolve_2026-09-28.dxf"
	test_plate_dxf.T
	test_plate_dxf.R
	test_plate_dxf.TH_O
	test_plate_dxf.TH_F
	test_plate_dxf.E_O_R
	test_plate_dxf.F_O
	test_plate_dxf.E_D = F_O * _s(TH_O)
	test_plate_dxf.F_F = F_O * _s(TH_O) / _s(TH_F)
float	test_plate_dxf.E_F_R = 1.72
	test_plate_dxf.L_O
	test_plate_dxf.L_F
float	test_plate_dxf.G = 0.04