Time Base functions More...

Collaboration diagram for TIM Time Base functions:

Functions
HAL_StatusTypeDef	HAL_TIM_Base_Init (TIM_HandleTypeDef *htim)
HAL_StatusTypeDef	HAL_TIM_Base_DeInit (TIM_HandleTypeDef *htim)
void	HAL_TIM_Base_MspInit (TIM_HandleTypeDef *htim)
	TIM_Base MSP Initialization This function configures the hardware resources used in this example.
void	HAL_TIM_Base_MspDeInit (TIM_HandleTypeDef *htim)
	TIM_Base MSP De-Initialization This function freeze the hardware resources used in this example.
HAL_StatusTypeDef	HAL_TIM_Base_Start (TIM_HandleTypeDef *htim)
HAL_StatusTypeDef	HAL_TIM_Base_Stop (TIM_HandleTypeDef *htim)
HAL_StatusTypeDef	HAL_TIM_Base_Start_IT (TIM_HandleTypeDef *htim)
HAL_StatusTypeDef	HAL_TIM_Base_Stop_IT (TIM_HandleTypeDef *htim)
HAL_StatusTypeDef	HAL_TIM_Base_Start_DMA (TIM_HandleTypeDef htim, const uint32_t pData, uint16_t Length)
HAL_StatusTypeDef	HAL_TIM_Base_Stop_DMA (TIM_HandleTypeDef *htim)

Detailed Description

Time Base functions

Function Documentation

◆ HAL_TIM_Base_DeInit()

HAL_StatusTypeDef HAL_TIM_Base_DeInit ( TIM_HandleTypeDef * htim )

◆ HAL_TIM_Base_Init()

HAL_StatusTypeDef HAL_TIM_Base_Init ( TIM_HandleTypeDef * htim )

Referenced by HAL_InitTick(), and MX_TIM2_Init().

◆ HAL_TIM_Base_MspDeInit()

void HAL_TIM_Base_MspDeInit ( TIM_HandleTypeDef * htim_base )

TIM_Base MSP De-Initialization This function freeze the hardware resources used in this example.

Parameters

htim_base TIM_Base handle pointer

Return values

None

TIM2 GPIO Configuration PB11 ------> TIM2_CH4

Definition at line 849 of file stm32h7xx_hal_msp.c.

References __HAL_RCC_TIM2_CLK_DISABLE, HAL_GPIO_DeInit(), HAL_NVIC_DisableIRQ(), TIM_HandleTypeDef::Instance, TIM2, TIM2_IRQn, TIMEPULSE_GPIO_Port, and TIMEPULSE_Pin.

◆ HAL_TIM_Base_MspInit()

void HAL_TIM_Base_MspInit ( TIM_HandleTypeDef * htim_base )

TIM_Base MSP Initialization This function configures the hardware resources used in this example.

Parameters

htim_base TIM_Base handle pointer

Return values

None

TIM2 GPIO Configuration PB11 ------> TIM2_CH4

Definition at line 730 of file stm32h7xx_hal_msp.c.

References __HAL_RCC_GPIOB_CLK_ENABLE, __HAL_RCC_TIM2_CLK_ENABLE, GPIO_InitTypeDef::Alternate, GPIO_AF1_TIM2, GPIO_MODE_AF_PP, GPIO_NOPULL, GPIO_SPEED_FREQ_LOW, HAL_GPIO_Init(), HAL_NVIC_EnableIRQ(), HAL_NVIC_SetPriority(), TIM_HandleTypeDef::Instance, GPIO_InitTypeDef::Mode, GPIO_InitTypeDef::Pin, GPIO_InitTypeDef::Pull, GPIO_InitTypeDef::Speed, TIM2, TIM2_IRQn, TIMEPULSE_GPIO_Port, and TIMEPULSE_Pin.

◆ HAL_TIM_Base_Start()

HAL_StatusTypeDef HAL_TIM_Base_Start ( TIM_HandleTypeDef * htim )

◆ HAL_TIM_Base_Start_DMA()

HAL_StatusTypeDef HAL_TIM_Base_Start_DMA	(	TIM_HandleTypeDef *	htim,
		const uint32_t *	pData,
		uint16_t	Length )

◆ HAL_TIM_Base_Start_IT()

HAL_StatusTypeDef HAL_TIM_Base_Start_IT ( TIM_HandleTypeDef * htim )

Referenced by HAL_InitTick().

◆ HAL_TIM_Base_Stop()

HAL_StatusTypeDef HAL_TIM_Base_Stop ( TIM_HandleTypeDef * htim )

◆ HAL_TIM_Base_Stop_DMA()

HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA ( TIM_HandleTypeDef * htim )

◆ HAL_TIM_Base_Stop_IT()

HAL_StatusTypeDef HAL_TIM_Base_Stop_IT ( TIM_HandleTypeDef * htim )

Functions