STAR
Cal STAR — firmware, DAQ server, and engine design
Loading...
Searching...
No Matches
HAL_DMA_MuxSyncConfigTypeDef Struct Reference

HAL DMAMUX Synchronization configuration structure definition. More...

#include <stm32h7xx_hal_dma_ex.h>

Public Attributes

uint32_t SyncSignalID
 Specifies the synchronization signal gating the DMA request in periodic mode.
uint32_t SyncPolarity
 Specifies the polarity of the signal on which the DMA request is synchronized.
FunctionalState SyncEnable
 Specifies if the synchronization shall be enabled or disabled This parameter can take the value ENABLE or DISABLE.
FunctionalState EventEnable
 Specifies if an event shall be generated once the RequestNumber is reached.
uint32_t RequestNumber
 Specifies the number of DMA request that will be authorized after a sync event.

Detailed Description

HAL DMAMUX Synchronization configuration structure definition.

Definition at line 57 of file stm32h7xx_hal_dma_ex.h.

Member Data Documentation

◆ EventEnable

FunctionalState HAL_DMA_MuxSyncConfigTypeDef::EventEnable

Specifies if an event shall be generated once the RequestNumber is reached.

This parameter can take the value ENABLE or DISABLE

Definition at line 69 of file stm32h7xx_hal_dma_ex.h.

◆ RequestNumber

uint32_t HAL_DMA_MuxSyncConfigTypeDef::RequestNumber

Specifies the number of DMA request that will be authorized after a sync event.

This parameters can be in the range 1 to 32

Definition at line 72 of file stm32h7xx_hal_dma_ex.h.

◆ SyncEnable

FunctionalState HAL_DMA_MuxSyncConfigTypeDef::SyncEnable

Specifies if the synchronization shall be enabled or disabled This parameter can take the value ENABLE or DISABLE.

Definition at line 65 of file stm32h7xx_hal_dma_ex.h.

◆ SyncPolarity

uint32_t HAL_DMA_MuxSyncConfigTypeDef::SyncPolarity

Specifies the polarity of the signal on which the DMA request is synchronized.

This parameter can be a value of DMAEx MUX SyncPolarity selection

Definition at line 62 of file stm32h7xx_hal_dma_ex.h.

◆ SyncSignalID

uint32_t HAL_DMA_MuxSyncConfigTypeDef::SyncSignalID

Specifies the synchronization signal gating the DMA request in periodic mode.

This parameter can be a value of DMAEx MUX SyncSignalID selection

Definition at line 59 of file stm32h7xx_hal_dma_ex.h.


The documentation for this struct was generated from the following file: