RCC_CRS Init structure definition. More...

#include <stm32h7xx_hal_rcc_ex.h>

Public Attributes
uint32_t	Prescaler
	Specifies the division factor of the SYNC signal.
uint32_t	Source
	Specifies the SYNC signal source.
uint32_t	Polarity
	Specifies the input polarity for the SYNC signal source.
uint32_t	ReloadValue
	Specifies the value to be loaded in the frequency error counter with each SYNC event.
uint32_t	ErrorLimitValue
	Specifies the value to be used to evaluate the captured frequency error value.
uint32_t	HSI48CalibrationValue
	Specifies a user-programmable trimming value to the HSI48 oscillator.

Detailed Description

RCC_CRS Init structure definition.

Definition at line 293 of file stm32h7xx_hal_rcc_ex.h.

Member Data Documentation

◆ ErrorLimitValue

uint32_t RCC_CRSInitTypeDef::ErrorLimitValue

Specifies the value to be used to evaluate the captured frequency error value.

This parameter must be a number between 0 and 0xFF or a value of RCCEx CRS ErrorLimitDefault

Definition at line 308 of file stm32h7xx_hal_rcc_ex.h.

◆ HSI48CalibrationValue

uint32_t RCC_CRSInitTypeDef::HSI48CalibrationValue

Specifies a user-programmable trimming value to the HSI48 oscillator.

This parameter must be a number between 0 and 0x3F or a value of RCCEx CRS HSI48CalibrationDefault

Definition at line 311 of file stm32h7xx_hal_rcc_ex.h.

◆ Polarity

uint32_t RCC_CRSInitTypeDef::Polarity

Specifies the input polarity for the SYNC signal source.

This parameter can be a value of RCCEx CRS SynchroPolarity

Definition at line 301 of file stm32h7xx_hal_rcc_ex.h.

◆ Prescaler

uint32_t RCC_CRSInitTypeDef::Prescaler

Specifies the division factor of the SYNC signal.

This parameter can be a value of RCCEx CRS SynchroDivider

Definition at line 295 of file stm32h7xx_hal_rcc_ex.h.

◆ ReloadValue

uint32_t RCC_CRSInitTypeDef::ReloadValue

Specifies the value to be loaded in the frequency error counter with each SYNC event.

It can be calculated in using macro HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET, FSYNC) This parameter must be a number between 0 and 0xFFFF or a value of RCCEx CRS ReloadValueDefault .

Definition at line 304 of file stm32h7xx_hal_rcc_ex.h.

◆ Source

uint32_t RCC_CRSInitTypeDef::Source

Specifies the SYNC signal source.

This parameter can be a value of RCCEx CRS SynchroSource

Definition at line 298 of file stm32h7xx_hal_rcc_ex.h.

The documentation for this struct was generated from the following file:

firmware/Flight_Computer/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h

Public Attributes