STAR
Cal STAR — firmware, DAQ server, and engine design
Loading...
Searching...
No Matches
TIM_BreakDeadTimeConfigTypeDef Struct Reference
STM32H7xx_HAL_Driver » TIM » TIM Exported Types

TIM Break input(s) and Dead time configuration Structure definition. More...

#include <stm32h7xx_hal_tim.h>

Public Attributes

uint32_t OffStateRunMode
 TIM off state in run mode, This parameter can be a value of TIM OSSR OffState Selection for Run mode state.
uint32_t OffStateIDLEMode
 TIM off state in IDLE mode, This parameter can be a value of TIM OSSI OffState Selection for Idle mode state.
uint32_t LockLevel
 TIM Lock level, This parameter can be a value of TIM Lock level.
uint32_t DeadTime
 TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF.
uint32_t BreakState
 TIM Break State, This parameter can be a value of TIM Break Input Enable.
uint32_t BreakPolarity
 TIM Break input polarity, This parameter can be a value of TIM Break Input Polarity.
uint32_t BreakFilter
 Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF.
uint32_t Break2State
 TIM Break2 State, This parameter can be a value of TIM Break input 2 Enable.
uint32_t Break2Polarity
 TIM Break2 input polarity, This parameter can be a value of TIM Break Input 2 Polarity.
uint32_t Break2Filter
 TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF.
uint32_t AutomaticOutput
 TIM Automatic Output Enable state, This parameter can be a value of TIM Automatic Output Enable.

Detailed Description

TIM Break input(s) and Dead time configuration Structure definition.

Note
2 break inputs can be configured (BKIN and BKIN2) with configurable filter and polarity.

Definition at line 271 of file stm32h7xx_hal_tim.h.

Member Data Documentation

◆ AutomaticOutput

uint32_t TIM_BreakDeadTimeConfigTypeDef::AutomaticOutput

TIM Automatic Output Enable state, This parameter can be a value of TIM Automatic Output Enable.

Definition at line 301 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ Break2Filter

uint32_t TIM_BreakDeadTimeConfigTypeDef::Break2Filter

TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF.

Definition at line 295 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ Break2Polarity

uint32_t TIM_BreakDeadTimeConfigTypeDef::Break2Polarity

TIM Break2 input polarity, This parameter can be a value of TIM Break Input 2 Polarity.

Definition at line 293 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ Break2State

uint32_t TIM_BreakDeadTimeConfigTypeDef::Break2State

TIM Break2 State, This parameter can be a value of TIM Break input 2 Enable.

Definition at line 291 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ BreakFilter

uint32_t TIM_BreakDeadTimeConfigTypeDef::BreakFilter

Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF.

Definition at line 285 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ BreakPolarity

uint32_t TIM_BreakDeadTimeConfigTypeDef::BreakPolarity

TIM Break input polarity, This parameter can be a value of TIM Break Input Polarity.

Definition at line 283 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ BreakState

uint32_t TIM_BreakDeadTimeConfigTypeDef::BreakState

TIM Break State, This parameter can be a value of TIM Break Input Enable.

Definition at line 281 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ DeadTime

uint32_t TIM_BreakDeadTimeConfigTypeDef::DeadTime

TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF.

Definition at line 279 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ LockLevel

uint32_t TIM_BreakDeadTimeConfigTypeDef::LockLevel

TIM Lock level, This parameter can be a value of TIM Lock level.

Definition at line 277 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ OffStateIDLEMode

uint32_t TIM_BreakDeadTimeConfigTypeDef::OffStateIDLEMode

TIM off state in IDLE mode, This parameter can be a value of TIM OSSI OffState Selection for Idle mode state.

Definition at line 275 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

◆ OffStateRunMode

uint32_t TIM_BreakDeadTimeConfigTypeDef::OffStateRunMode

TIM off state in run mode, This parameter can be a value of TIM OSSR OffState Selection for Run mode state.

Definition at line 273 of file stm32h7xx_hal_tim.h.

Referenced by MX_TIM1_Init().

The documentation for this struct was generated from the following file: