test_dewar_load.py File Reference

Go to the source code of this file.

Namespaces
namespace	test_dewar_load

Functions
TankSim	test_dewar_load._sim (*, float liquid_mass=0.0, float wall_K=293.15, bool fuel=False)
None	test_dewar_load.test_the_fill_line_is_crane_and_clamond ()
None	test_dewar_load.test_a_clean_line_pours_tens_of_times_what_the_valve_lets_through ()
None	test_dewar_load.test_nothing_flows_back_into_the_dewar ()
None	test_dewar_load.test_into_a_warm_tank_every_gram_boils_into_the_ullage ()
None	test_dewar_load.test_once_the_wall_is_cold_the_load_collects ()
None	test_dewar_load.test_the_last_of_the_wall_boils_and_the_rest_collects ()
None	test_dewar_load.test_a_full_tank_takes_no_more ()
None	test_dewar_load._advance (TankSim sim, float dt)
None	test_dewar_load.test_no_dewar_is_the_fixed_rate_load_exactly ()
None	test_dewar_load.test_a_fuel_load_ignores_the_dewar ()
	test_dewar_load._le4_session (**float setup)
tuple[float, float]	test_dewar_load._chill (float seconds, **float setup)
None	test_dewar_load.test_the_carts_vent_valve_sizes_an_unsized_gse_vent ()
None	test_dewar_load.test_a_disconnect_that_gives_its_own_cv_keeps_it ()
None	test_dewar_load.test_a_chilling_tank_climbs_and_climbs_more_the_harder_the_dewar_pushes ()
None	test_dewar_load.test_the_fill_cv_is_calibrated_to_the_stands_30_psig_chill ()
None	test_dewar_load.test_without_a_dewar_the_chill_vents_outside_the_ullage_as_before ()
None	test_dewar_load.test_a_chilling_tank_vents_its_boil_off_not_air_the_floor_puts_back ()
None	test_dewar_load.test_a_skipped_chilldown_collects_at_once_where_a_chilling_one_does_not ()
None	test_dewar_load.test_skipping_chilldown_leaves_a_storable_and_an_unknown_tank_alone ()

Variables
float	test_dewar_load.WALL_MASS = 3.63
float	test_dewar_load.WALL_CP = 897.0