#include <algorithm>
#include <cstdarg>
#include <cstddef>
#include <cstdint>
#include <cstring>
#include <vector>
#include <cstdio>

Include dependency graph for Arduino.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Classes
class	IPAddress
struct	SerialStub
struct	ESPClassStub

Macros
#define	HIGH 1
#define	LOW 0
#define	INPUT 0
#define	OUTPUT 1
#define	LED_BUILTIN 2
#define	HEX 16
#define	DEC 10
#define	min(a, b)
#define	max(a, b)
#define	SPI_MODE1 1
#define	HSPI 2

Typedefs
typedef uint8_t	byte
	Minimal Arduino.h stub for native unit tests.

Functions
unsigned long	millis ()
void	stub_set_millis (unsigned long v)
unsigned long	micros ()
void	pinMode (int, int)
void	digitalWrite (int, int)
int	digitalRead (int)
int	analogRead (int)
void	delay (unsigned long)
void	delayMicroseconds (unsigned int)

Variables
static unsigned long	_stub_millis_value = 0
static unsigned long	_stub_micros_value = 0
static SerialStub	Serial
static ESPClassStub	ESP

Macro Definition Documentation

◆ DEC

#define DEC 10

Definition at line 25 of file Arduino.h.

◆ HEX

#define HEX 16

Definition at line 24 of file Arduino.h.

Referenced by loop(), SensorHotfire::loop(), FirmwareHash::print(), printBoardInfo(), BoardNet::printMac(), printRawPacketData(), probeW5500Version(), and setup().

◆ HIGH

#define HIGH 1

◆ HSPI

#define HSPI 2

Definition at line 132 of file Arduino.h.

Referenced by ADC_SPI().

◆ INPUT

#define INPUT 0

Definition at line 21 of file Arduino.h.

Referenced by init_adc_cb(), initializeCurrentSensePins(), initializeCurrentSensePins(), initializeValves(), and setup().

◆ LED_BUILTIN

#define LED_BUILTIN 2

Definition at line 23 of file Arduino.h.

◆ LOW

#define LOW 0

Definition at line 20 of file Arduino.h.

Referenced by applyAbortLocalOnly(), applyAbortToAllActuators(), applyStacklightOutputs(), applyVentLocalOnly(), applyVentToAllActuators(), autoPolarityCal(), collect_chunk_impl(), digitalRead(), driveAllSolenoids(), flightStateInit(), flush_adc_cycles(), flush_cycles(), flush_cycles(), init_adc_cb(), initializeActuators(), initializeActuators(), initializeActuators(), loop(), motorCoast(), motorDrive(), probeW5500Version(), processActuatorCommand(), processActuatorCommands(), processActuatorCommands(), processPWMActuatorCommand(), STAR_MCP3201::read(), read_data(), read_data(), read_one(), SensorSelfTest::read_sensor_bias(), read_single_connector(), ADS126X::readADC2(), sfe_ISM330DHCX::SfeSPI::readRegisterRegion(), ADS126X::readRegisters(), SensorSelfTest::run_adc_self_test(), ADS126X::sendCommand(), SensorHotfire::setup(), setup(), setValve(), updateLedNonBlocking(), updateLedNonBlocking(), updatePWM(), updatePWM(), SensorHotfire::updateStateLed(), sfe_ISM330DHCX::SfeSPI::writeRegisterByte(), sfe_ISM330DHCX::SfeSPI::writeRegisterRegion(), and ADS126X::writeRegisters().

◆ max

#define max	(		a,
			b )

Value:

((a) > (b) ? (a) : (b))

b

*brief create JSON pointer *sa reference_tokens const string_t const string_t & b

Definition json.hpp:13878

a

*brief create JSON pointer *sa reference_tokens const string_t & a

Definition json.hpp:13877

Definition at line 43 of file Arduino.h.

◆ min

#define min	(		a,
			b )

Value:

((a) < (b) ? (a) : (b))

Definition at line 42 of file Arduino.h.

◆ OUTPUT

#define OUTPUT 1

Definition at line 22 of file Arduino.h.

Referenced by ADS126X::begin(), flightStateInit(), solenoids::init(), init_adc_cb(), initializeActuators(), initializeActuators(), initializeActuators(), initializeValves(), initOutputs(), SensorHotfire::setup(), and setup().

◆ SPI_MODE1

#define SPI_MODE1 1

Definition at line 131 of file Arduino.h.

Referenced by init_adc_cb(), setup(), and ADS126X::spi_rw().

Typedef Documentation

◆ byte

typedef uint8_t byte

Minimal Arduino.h stub for native unit tests.

Provides just enough to compile DAQv2-Comms, SensorHotfireCore, firmware_hash.h, and hotfire_ota.h off-target.

Definition at line 16 of file Arduino.h.

Function Documentation

◆ analogRead()

int analogRead ( int )

inline

Definition at line 53 of file Arduino.h.

Referenced by loop(), readCurrentSensePins(), readCurrentSensePinsAndSend(), readCurrentSensePinsAndSend(), and readPositionCounts().

◆ delay()

void delay ( unsigned long )

inline

Definition at line 56 of file Arduino.h.

◆ delayMicroseconds()

void delayMicroseconds ( unsigned int )

inline

Definition at line 58 of file Arduino.h.

Referenced by collect_chunk_impl(), flush_adc_cycles(), flush_cycles(), flush_cycles(), loop(), read_data(), read_data(), read_one(), SensorSelfTest::read_sensor_bias(), read_single_connector(), SensorSelfTest::run_adc_self_test(), setup(), and writeControlBit().

◆ digitalRead()

int digitalRead ( int )

inline

Definition at line 50 of file Arduino.h.

References LOW.

Referenced by collect_chunk_impl(), flush_adc_cycles(), flush_cycles(), flush_cycles(), loop(), read_data(), read_data(), read_one(), SensorSelfTest::read_sensor_bias(), read_single_connector(), and SensorSelfTest::run_adc_self_test().

◆ digitalWrite()

void digitalWrite	(	int	,
		int	)

inline

Definition at line 48 of file Arduino.h.

Referenced by applyAbortLocalOnly(), applyAbortToAllActuators(), applyStacklightOutputs(), applyVentLocalOnly(), applyVentToAllActuators(), autoPolarityCal(), ADS126X::begin(), driveAllSolenoids(), flightStateInit(), init_adc_cb(), initializeActuators(), initializeActuators(), initializeActuators(), initializeValves(), initOutputs(), loop(), motorCoast(), motorDrive(), probeW5500Version(), processActuatorCommand(), processActuatorCommands(), processActuatorCommands(), processPWMActuatorCommand(), STAR_MCP3201::read(), ADS126X::readADC2(), sfe_ISM330DHCX::SfeSPI::readRegisterRegion(), ADS126X::readRegisters(), ADS126X::sendCommand(), SensorHotfire::setup(), setup(), setValve(), updateLedNonBlocking(), updateLedNonBlocking(), updatePWM(), updatePWM(), SensorHotfire::updateStateLed(), sfe_ISM330DHCX::SfeSPI::writeRegisterByte(), sfe_ISM330DHCX::SfeSPI::writeRegisterRegion(), and ADS126X::writeRegisters().

◆ micros()

unsigned long micros ( )

inline

Definition at line 37 of file Arduino.h.

References _stub_micros_value.

Referenced by loop(), processPWMActuatorCommand(), and updatePWM().

◆ millis()

unsigned long millis ( )

inline

Definition at line 29 of file Arduino.h.

References _stub_millis_value.

Referenced by applyAbortToAllActuators(), applyPacketTransition(), applyPacketTransition(), applyVentToAllActuators(), BoardNet::begin(), checkMagnetPresence(), checkMagnetPresence(), collect_chunk(), collect_chunk_impl(), create_abort_done_packet(), create_no_connection_abort_packet(), flightStateOnApogee(), flightStateTick(), flushLogs(), SensorHotfire::flushLogs(), heartbeatTimedOut(), heartbeatTimedOut(), loop(), SensorHotfire::loop(), BoardNet::onServerPacket(), pollNetwork(), StarOTA::printTestMessage(), processIncomingPacket(), processIncomingPacket(), processPWMActuatorCommand(), processPWMActuatorCommand(), read_data(), read_data(), readCurrentSensePins(), readCurrentSensePinsAndSend(), readCurrentSensePinsAndSend(), StarOTA::Server::readSize(), BoardNet::retryDhcp(), run_Active(), run_Active(), run_ConnectionLossDetected(), run_ConnectionLossDetected(), run_NoConnectionAbort(), run_NoConnectionAbort(), run_NoPTAbort(), run_PTAbort(), run_StandaloneAbort(), run_StandardAbort(), run_StandardAbort(), runSelfTest(), send_chunks_to_impl(), sendBoardHeartbeat(), sendBoardHeartbeat(), sendBoardHeartbeat(), SensorHotfire::sendBoardHeartbeat(), sendBoardHeartbeatTo(), sendDataChunks(), sendExampleMessage(), sendHeartbeat(), sendHeartbeatPacket(), sendPositions(), sendReplyTo(), sendSensorDataPacket(), sendSensorDataPacket(), sendSensorDataPacketTo(), sendSensorPacket(), BoardNet::serverWentSilent(), setState(), setup(), startHeartbeatLoop(), streamSensorDataIfDue(), streamSensorDataIfDue(), StarOTA::Server::transfer(), transitionTo(), updateLedNonBlocking(), updateLedNonBlocking(), updatePWM(), updatePWM(), and SensorHotfire::updateStateLed().

◆ pinMode()

void pinMode	(	int	,
		int	)

inline

Definition at line 46 of file Arduino.h.

Referenced by ADS126X::begin(), flightStateInit(), init_adc_cb(), initializeActuators(), initializeActuators(), initializeActuators(), initializeCurrentSensePins(), initializeCurrentSensePins(), initializeValves(), initOutputs(), SensorHotfire::setup(), and setup().

◆ stub_set_millis()

void stub_set_millis ( unsigned long v )

inline

Definition at line 32 of file Arduino.h.

References _stub_millis_value.

Referenced by makeState(), test_failed_retry_stays_reflashable(), test_no_retry_during_an_ota(), test_retry_that_gets_a_lease_moves_the_board(), test_retry_waits_for_the_interval(), test_server_is_learned_from_its_packets(), test_server_silence_only_after_it_was_learned(), and test_server_silence_trips_after_timeout().

Variable Documentation

◆ _stub_micros_value

unsigned long _stub_micros_value = 0

static

Definition at line 36 of file Arduino.h.

Referenced by micros().

◆ _stub_millis_value

unsigned long _stub_millis_value = 0

static

Definition at line 28 of file Arduino.h.

Referenced by millis(), and stub_set_millis().

◆ ESP

ESPClassStub ESP

static

Definition at line 139 of file Arduino.h.

Referenced by EthernetInit(), and StarOTA::Server::handleClient().

◆ Serial

SerialStub Serial

static

Definition at line 128 of file Arduino.h.

Referenced by SensorHotfire::applyPacketTransition(), autoPolarityCal(), BoardNet::begin(), StarOTA::Server::begin(), checkMagnetPresence(), checkMagnetPresence(), decodeAndPrintPacket(), dumpDiagnostics(), StarOTA::Server::fail(), StarOTA::Server::handleClient(), initializeActuators(), initializeActuators(), initializeActuators(), initializeCurrentSensePins(), StarOTA::anonymous_namespace{STAR_EthernetOTA.cpp}::logf(), loop(), SensorHotfire::loop(), BoardNet::onServerPacket(), pollNetwork(), FirmwareHash::print(), printBoardHeartbeat(), printBoardInfo(), anonymous_namespace{main.cpp}::printDivider(), BoardNet::printMac(), printMenu(), printPacketHeader(), printRawPacketData(), printReceivedPacket(), printResults(), printServerHeartbeat(), StarOTA::printTestMessage(), probeW5500Version(), processActuatorCommand(), processCLI(), processIncomingPacket(), SensorHotfire::processIncomingPacket(), processPWMActuatorCommand(), read_data(), read_single_connector(), readCurrentSensePins(), BoardNet::retryDhcp(), run_self_test_cb(), runSelfTest(), sendBoardHeartbeatTo(), sendExampleMessage(), sendHeartbeatPacket(), sendReplyTo(), sendSensorDataPacket(), sendSensorDataPacket(), sendSensorPacket(), setState(), setState(), SensorHotfire::setup(), setup(), setup(), startHeartbeatLoop(), StarOTA::Server::transfer(), and updatePWM().

Classes

Macros

Typedefs

Functions

Variables

Macro Definition Documentation

◆ DEC

◆ HEX

◆ HIGH

◆ HSPI

◆ INPUT

◆ LED_BUILTIN

◆ LOW

◆ max

◆ min

◆ OUTPUT

◆ SPI_MODE1

Typedef Documentation

◆ byte

Function Documentation

◆ analogRead()

◆ delay()

◆ delayMicroseconds()

◆ digitalRead()

◆ digitalWrite()

◆ micros()

◆ millis()

◆ pinMode()

◆ stub_set_millis()

Variable Documentation

◆ _stub_micros_value

◆ _stub_millis_value

◆ ESP

◆ Serial