main.cpp File Reference

#include "main.h"
#include <Adafruit_BME280.h>
#include <Arduino.h>
#include <Ethernet.h>
#include <EthernetUdp.h>
#include <SPI.h>
#include <STAR_EthernetOTA.h>
#include <Wire.h>
#include <daq-protocol.h>
#include <esp_mac.h>
#include "firmware_hash.h"
#include "pins.h"

Include dependency graph for main.cpp:

Go to the source code of this file.

Functions
void	setup ()
void	loop ()

Variables
static Adafruit_BME280	bme
static EthernetUDP	udp
static StarOTA::Server	ota_server (ENV_OTA_PORT)
static byte	mac [6]
static IPAddress	server_ip (192, 168, 2, ENV_SERVER_IP_OCTET_4)
static IPAddress	static_ip (192, 168, 2, ENV_BOARD_ID)
static IPAddress	gateway (192, 168, 2, 1)
static IPAddress	subnet (255, 255, 255, 0)
static IPAddress	dns_ip (192, 168, 2, 1)
static uint8_t	pkt_buf [64]

Function Documentation

loop()

void loop

(

)

Definition at line 75 of file main.cpp.

References daq::ACTIVE, bme, daq::create_board_heartbeat_packet(), daq::create_environmental_data_packet(), delay(), ENV_BOARD_ID, ENV_HEARTBEAT_INTERVAL_MS, ENV_SEND_INTERVAL_MS, ENV_SERVER_PORT, FirmwareHash::get(), millis(), ota_server, daq::parse_server_heartbeat_packet(), pkt_buf, StarOTA::printTestMessage(), daq::SAFE, Serial, daq::SERVER_HEARTBEAT, server_ip, temp, and udp.

setup()

void setup

(

void

)

Definition at line 30 of file main.cpp.

References bme, BME280_I2C_ADDR, delay(), dns_ip, ENV_ETH_BEGIN_DELAY_MS, ENV_ETH_INIT_DELAY_MS, ENV_ETH_SPI_DELAY_MS, ENV_LOCAL_PORT, ENV_OTA_PORT, ENV_SEND_RATE_HZ, ENV_SERVER_IP_OCTET_4, ENV_SERVER_PORT, Ethernet, gateway, mac, ota_server, PIN_ETH_CS, PIN_ETH_MISO, PIN_ETH_MOSI, PIN_ETH_SCLK, PIN_SCL, PIN_SDA, FirmwareHash::print(), Serial, static_ip, subnet, and udp.

Variable Documentation

bme

Adafruit_BME280 bme

static

Definition at line 16 of file main.cpp.

Referenced by loop(), and setup().

dns_ip

IPAddress dns_ip(192, 168, 2, 1) ( 192 , 168 , 2 , 1  )

static

Referenced by setup().

gateway

IPAddress gateway(192, 168, 2, 1) ( 192 , 168 , 2 , 1  )

static

mac

byte mac[6]

static

Definition at line 20 of file main.cpp.

ota_server

StarOTA::Server ota_server(ENV_OTA_PORT) ( ENV_OTA_PORT )

static

Referenced by loop(), and setup().

pkt_buf

uint8_t pkt_buf[64]

static

Definition at line 28 of file main.cpp.

Referenced by loop(), and main().

server_ip

IPAddress server_ip(192, 168, 2, ENV_SERVER_IP_OCTET_4) ( 192 , 168 , 2 , ENV_SERVER_IP_OCTET_4  )

static

Referenced by loop().

static_ip

IPAddress static_ip(192, 168, 2, ENV_BOARD_ID) ( 192 , 168 , 2 , ENV_BOARD_ID  )

static

Referenced by setup().

subnet

IPAddress subnet(255, 255, 255, 0) ( 255 , 255 , 255 , 0  )

static

udp

EthernetUDP udp

static

Definition at line 17 of file main.cpp.