TIM Time base Configuration Structure definition. More...

#include <stm32h7xx_hal_tim.h>

Public Attributes
uint32_t	Prescaler
	Specifies the prescaler value used to divide the TIM clock.
uint32_t	CounterMode
	Specifies the counter mode.
uint32_t	Period
	Specifies the period value to be loaded into the active Auto-Reload Register at the next update event.
uint32_t	ClockDivision
	Specifies the clock division.
uint32_t	RepetitionCounter
	Specifies the repetition counter value.
uint32_t	AutoReloadPreload
	Specifies the auto-reload preload.

Detailed Description

TIM Time base Configuration Structure definition.

Definition at line 46 of file stm32h7xx_hal_tim.h.

Member Data Documentation

◆ AutoReloadPreload

uint32_t TIM_Base_InitTypeDef::AutoReloadPreload

Specifies the auto-reload preload.

This parameter can be a value of TIM Auto-Reload Preload

Definition at line 72 of file stm32h7xx_hal_tim.h.

◆ ClockDivision

uint32_t TIM_Base_InitTypeDef::ClockDivision

Specifies the clock division.

This parameter can be a value of TIM Clock Division

Definition at line 58 of file stm32h7xx_hal_tim.h.

◆ CounterMode

uint32_t TIM_Base_InitTypeDef::CounterMode

Specifies the counter mode.

This parameter can be a value of TIM Counter Mode

Definition at line 51 of file stm32h7xx_hal_tim.h.

◆ Period

uint32_t TIM_Base_InitTypeDef::Period

Specifies the period value to be loaded into the active Auto-Reload Register at the next update event.

This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.

Definition at line 54 of file stm32h7xx_hal_tim.h.

◆ Prescaler

uint32_t TIM_Base_InitTypeDef::Prescaler

Specifies the prescaler value used to divide the TIM clock.

This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF

Definition at line 48 of file stm32h7xx_hal_tim.h.

◆ RepetitionCounter

uint32_t TIM_Base_InitTypeDef::RepetitionCounter

Specifies the repetition counter value.

Each time the RCR downcounter reaches zero, an update event is generated and counting restarts from the RCR value (N). This means in PWM mode that (N+1) corresponds to:

the number of PWM periods in edge-aligned mode
the number of half PWM period in center-aligned mode GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.

Definition at line 61 of file stm32h7xx_hal_tim.h.

The documentation for this struct was generated from the following file:

firmware/Flight_Computer/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h

Public Attributes