TIM One Pulse Mode Configuration Structure definition. More...

#include <stm32h7xx_hal_tim.h>

Public Attributes
uint32_t	OCMode
	Specifies the TIM mode.
uint32_t	Pulse
	Specifies the pulse value to be loaded into the Capture Compare Register.
uint32_t	OCPolarity
	Specifies the output polarity.
uint32_t	OCNPolarity
	Specifies the complementary output polarity.
uint32_t	OCIdleState
	Specifies the TIM Output Compare pin state during Idle state.
uint32_t	OCNIdleState
	Specifies the TIM Output Compare pin state during Idle state.
uint32_t	ICPolarity
	Specifies the active edge of the input signal.
uint32_t	ICSelection
	Specifies the input.
uint32_t	ICFilter
	Specifies the input capture filter.

Detailed Description

TIM One Pulse Mode Configuration Structure definition.

Definition at line 111 of file stm32h7xx_hal_tim.h.

Member Data Documentation

◆ ICFilter

uint32_t TIM_OnePulse_InitTypeDef::ICFilter

Specifies the input capture filter.

This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF

Definition at line 140 of file stm32h7xx_hal_tim.h.

◆ ICPolarity

uint32_t TIM_OnePulse_InitTypeDef::ICPolarity

Specifies the active edge of the input signal.

This parameter can be a value of TIM Input Capture Polarity

Definition at line 134 of file stm32h7xx_hal_tim.h.

◆ ICSelection

uint32_t TIM_OnePulse_InitTypeDef::ICSelection

Specifies the input.

This parameter can be a value of TIM Input Capture Selection

Definition at line 137 of file stm32h7xx_hal_tim.h.

◆ OCIdleState

uint32_t TIM_OnePulse_InitTypeDef::OCIdleState

Specifies the TIM Output Compare pin state during Idle state.

This parameter can be a value of TIM Output Compare Idle State

Note: This parameter is valid only for timer instances supporting break feature.

Definition at line 126 of file stm32h7xx_hal_tim.h.

◆ OCMode

uint32_t TIM_OnePulse_InitTypeDef::OCMode

Specifies the TIM mode.

This parameter can be a value of TIM Output Compare and PWM Modes

Definition at line 113 of file stm32h7xx_hal_tim.h.

◆ OCNIdleState

uint32_t TIM_OnePulse_InitTypeDef::OCNIdleState

Specifies the TIM Output Compare pin state during Idle state.

This parameter can be a value of TIM Complementary Output Compare Idle State

Note: This parameter is valid only for timer instances supporting break feature.

Definition at line 130 of file stm32h7xx_hal_tim.h.

◆ OCNPolarity

uint32_t TIM_OnePulse_InitTypeDef::OCNPolarity

Specifies the complementary output polarity.

This parameter can be a value of TIM Complementary Output Compare Polarity

Note: This parameter is valid only for timer instances supporting break feature.

Definition at line 122 of file stm32h7xx_hal_tim.h.

◆ OCPolarity

uint32_t TIM_OnePulse_InitTypeDef::OCPolarity

Specifies the output polarity.

This parameter can be a value of TIM Output Compare Polarity

Definition at line 119 of file stm32h7xx_hal_tim.h.

◆ Pulse

uint32_t TIM_OnePulse_InitTypeDef::Pulse

Specifies the pulse value to be loaded into the Capture Compare Register.

This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF

Definition at line 116 of file stm32h7xx_hal_tim.h.

The documentation for this struct was generated from the following file:

firmware/Flight_Computer/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h

Public Attributes