main.cpp

Go to the documentation of this file.

#include "main.h"
 
#include <Adafruit_BME280.h>
#include <Arduino.h>
#include <Wire.h>
 
static Adafruit_BME280 bme;
 
void setup() {
    Serial.begin(115200);
    while (!Serial)
        delay(10);
 
    Wire.begin(BME280_SDA_PIN, BME280_SCL_PIN);
 
    if (!bme.begin(BME280_I2C_ADDR, &Wire)) {
        Serial.println(
            "ERROR: BME280 not found. Check wiring and I2C address!");
        while (1)
            delay(100);
    }
 
    Serial.println("BME280 test starting...");
    Serial.println("temp_C,pressure_Pa,humidity_%");
}
 
void loop() {
    Serial.print(bme.readTemperature(), 2);
    Serial.print(",");
    Serial.print(bme.readPressure(), 2);
    Serial.print(",");
    Serial.println(bme.readHumidity(), 2);
 
    delay(10);
}