main.cpp File Reference

#include "main.h"
#include <Arduino.h>
#include <Ethernet.h>
#include <EthernetUdp.h>
#include <SPI.h>
#include <daq-protocol.h>
#include <cstring>
#include "STAR_ADS126X.h"
#include "esp_mac.h"
#include "connector_adc_map.h"
#include "sense_board_pins.h"

Include dependency graph for main.cpp:

Go to the source code of this file.

Macros
#define	PINS_ACTIVE_LAYOUT   PT_Board
	stream_one_adc: Read ADC1 only, single fixed channel (no mux cycling).
#define	FIXED_CONNECTOR   1
#define	FIXED_PIN   1
#define	NUM_SENSORS   1
#define	MAX_CHUNKS   10

Functions
SPIClass	ADC_SPI (HSPI)
void	read_data (int count)
void	sendSensorDataPacket ()
float	convert_code_to_voltage (int32_t code)
void	setup ()
void	loop ()

Variables
byte	mac [6]
IPAddress	staticIP (192, 168, 2, 101)
IPAddress	gateway (0, 0, 0, 0)
IPAddress	subnet (255, 255, 255, 0)
IPAddress	dns (192, 168, 2, 1)
IPAddress	receiverIP (192, 168, 2, 20)
const int	receiverPort = 5006
EthernetUDP	udp
static ADS126X	ads126x
std::vector< daq::SensorDataChunkCollection >	dataChunks
static const uint8_t	kSensorId = 1

Macro Definition Documentation

FIXED_CONNECTOR

#define FIXED_CONNECTOR   1

Definition at line 25 of file main.cpp.

Referenced by setup().

FIXED_PIN

#define FIXED_PIN   1

Definition at line 26 of file main.cpp.

Referenced by setup().

MAX_CHUNKS

#define MAX_CHUNKS   10

Definition at line 47 of file main.cpp.

Referenced by loop(), run_Active(), and run_StandaloneAbort().

NUM_SENSORS

#define NUM_SENSORS   1

Definition at line 46 of file main.cpp.

Referenced by initializeCurrentSensePins(), initializeCurrentSensePins(), loop(), read_data(), readCurrentSensePins(), readCurrentSensePinsAndSend(), readCurrentSensePinsAndSend(), sendDataChunks(), sendSensorDataPacket(), sendSensorDataPacket(), sendSensorPacket(), and setup().

PINS_ACTIVE_LAYOUT

#define PINS_ACTIVE_LAYOUT   PT_Board

stream_one_adc: Read ADC1 only, single fixed channel (no mux cycling).

Streams readings over Ethernet UDP using DAQv2-Comms packet format.

Definition at line 20 of file main.cpp.

Function Documentation

ADC_SPI()

SPIClass ADC_SPI

(

HSPI

)

References count(), and HSPI.

convert_code_to_voltage()

float convert_code_to_voltage

(

int32_t

code

)

Definition at line 51 of file main.cpp.

loop()

void loop

(

)

Definition at line 110 of file main.cpp.

References dataChunks, MAX_CHUNKS, read_data(), READINGS_PER_CHUNK, and sendSensorDataPacket().

read_data()

void read_data

(

int

count

)

Definition at line 119 of file main.cpp.

References ads126x, chunk, count(), dataChunks, delayMicroseconds(), digitalRead(), kSensorId, LOW, millis(), NUM_SENSORS, sense_board_pins::Pins, and Serial.

Referenced by loop().

sendSensorDataPacket()

void sendSensorDataPacket

(

)

Definition at line 139 of file main.cpp.

References daq::create_sensor_data_packet(), dataChunks, MAX_PACKET_SIZE, millis(), NUM_SENSORS, packetBuffer, receiverIP, receiverPort, Serial, and udp.

Referenced by loop().

setup()

void setup

(

void

)

Definition at line 55 of file main.cpp.

References ADC_SPI(), ads126x, ADS126X_AINCOM, ADS126X_REF_NEG_VSS, ADS126X_REF_POS_VDD, DATA_RATE, delay(), dns, Ethernet, FILTER, FIXED_CONNECTOR, FIXED_PIN, gateway, sense_board_pins::getAdcChannel(), HEX, INPUT, mac, pinMode(), sense_board_pins::Pins, Serial, SPI_MODE1, staticIP, subnet, and udp.

Variable Documentation

ads126x

ADS126X ads126x

static

Definition at line 40 of file main.cpp.

dataChunks

std::vector<daq::SensorDataChunkCollection> dataChunks

Definition at line 48 of file main.cpp.

Referenced by collect_chunk_impl(), loop(), read_data(), read_data(), run_Active(), run_StandaloneAbort(), send_chunks_to_cb(), send_chunks_to_impl(), sendDataChunks(), sendSensorDataPacket(), and sendSensorDataPacketTo().

dns

IPAddress dns(192, 168, 2, 1)	(	192	,
		168	,
		2	,
		1	)

gateway

IPAddress gateway(0, 0, 0, 0)	(	0	,
		0	,
		0	,
		0	)

kSensorId

const uint8_t kSensorId = 1

static

Definition at line 49 of file main.cpp.

Referenced by read_data().

mac

byte mac[6]

Definition at line 31 of file main.cpp.

receiverIP

IPAddress receiverIP(192, 168, 2, 20)	(	192	,
		168	,
		2	,
		20	)

receiverPort

const int receiverPort = 5006

Definition at line 37 of file main.cpp.

staticIP

IPAddress staticIP(192, 168, 2, 101)	(	192	,
		168	,
		2	,
		101	)

subnet

IPAddress subnet(255, 255, 255, 0)	(	255	,
		255	,
		255	,
		0	)

udp

EthernetUDP udp

Definition at line 38 of file main.cpp.