#include <Arduino.h>
#include <Ethernet.h>
#include <EthernetUdp.h>
#include <SPI.h>
#include <daq-protocol.h>
#include <esp_mac.h>
#include <cstring>
#include <vector>
#include "STAR_ADS126X.h"
#include "adc_mappings.h"
#include "connector_adc_map.h"
#include "sense_board_pins.h"

Include dependency graph for main.cpp:

Macros
#define	PINS_ACTIVE_LAYOUT sense_board_pins::LC_Board
#define	FILTER ADS126X_SINC4
#define	DATA_RATE ADS126X_RATE_1200

Functions
SPIClass	ADC_SPI (HSPI)
float	convert_code_to_voltage (int32_t code)
void	flush_cycles (int n)
void	setup ()
void	loop ()

Variables
static ADS126X	ads126x
const uint8_t	ADC1_CONNECTORS [] = {1, 2, 3, 6, 7}
const uint8_t	NUM_LC_SENSORS
byte	mac [6]
IPAddress	staticIP (192, 168, 2, 100)
IPAddress	gateway (192, 168, 2, 1)
IPAddress	subnet (255, 255, 255, 0)
IPAddress	dns (192, 168, 2, 1)
IPAddress	receiverIP (192, 168, 2, 20)
const int	receiverPort = 5006
EthernetUDP	udp
uint8_t	packetBuffer [MAX_PACKET_SIZE]

Macro Definition Documentation

◆ DATA_RATE

#define DATA_RATE ADS126X_RATE_1200

Definition at line 33 of file main.cpp.

◆ FILTER

#define FILTER ADS126X_SINC4

Definition at line 32 of file main.cpp.

◆ PINS_ACTIVE_LAYOUT

#define PINS_ACTIVE_LAYOUT sense_board_pins::LC_Board

Definition at line 15 of file main.cpp.

Function Documentation

◆ ADC_SPI()

SPIClass ADC_SPI ( HSPI )

References HSPI.

◆ convert_code_to_voltage()

float convert_code_to_voltage ( int32_t code )

Definition at line 48 of file main.cpp.

Referenced by loop().

◆ flush_cycles()

void flush_cycles ( int n )

Definition at line 53 of file main.cpp.

References ads126x, delayMicroseconds(), digitalRead(), LOW, and sense_board_pins::Pins.

Referenced by loop().

◆ loop()

void loop ( )

Definition at line 123 of file main.cpp.

References ADC1_CONNECTORS, ads126x, chunk, chunks, convert_code_to_voltage(), daq::create_sensor_data_packet(), DATA_RATE, delay(), delayMicroseconds(), digitalRead(), FILTER, flush_cycles(), sense_board_pins::getAdcChannel(), LOW, millis(), NUM_LC_SENSORS, packetBuffer, sense_board_pins::Pins, receiverIP, receiverPort, Serial, settlePulses(), and udp.

◆ setup()

void setup ( void )

Definition at line 61 of file main.cpp.

References ADC1_CONNECTORS, ADC_SPI(), ads126x, ADS126X_GAIN_8, DATA_RATE, delay(), dns, Ethernet, FILTER, gateway, INPUT, mac, NUM_LC_SENSORS, pinMode(), sense_board_pins::Pins, receiverIP, receiverPort, Serial, SPI_MODE1, staticIP, subnet, and udp.

Variable Documentation

◆ ADC1_CONNECTORS

const uint8_t ADC1_CONNECTORS[] = {1, 2, 3, 6, 7}

Definition at line 29 of file main.cpp.

Referenced by loop(), and setup().

◆ ads126x

ADS126X ads126x

static

Definition at line 25 of file main.cpp.

◆ dns

IPAddress dns(192, 168, 2, 1)	(	192	,
		168	,
		2	,
		1	)

◆ gateway

IPAddress gateway(192, 168, 2, 1)	(	192	,
		168	,
		2	,
		1	)

◆ mac

byte mac[6]

Definition at line 38 of file main.cpp.

◆ NUM_LC_SENSORS

const uint8_t NUM_LC_SENSORS

Initial value:

=

sizeof(ADC1_CONNECTORS) / sizeof(ADC1_CONNECTORS[0])

ADC1_CONNECTORS

const uint8_t ADC1_CONNECTORS[]

Definition main.cpp:29

Definition at line 30 of file main.cpp.

Referenced by loop(), and setup().

◆ packetBuffer

uint8_t packetBuffer[MAX_PACKET_SIZE]

Definition at line 46 of file main.cpp.

◆ receiverIP

IPAddress receiverIP(192, 168, 2, 20)	(	192	,
		168	,
		2	,
		20	)

◆ receiverPort

const int receiverPort = 5006

Definition at line 44 of file main.cpp.

◆ staticIP

IPAddress staticIP(192, 168, 2, 100)	(	192	,
		168	,
		2	,
		100	)

◆ subnet

IPAddress subnet(255, 255, 255, 0)	(	255	,
		255	,
		255	,
		0	)

◆ udp

EthernetUDP udp

Definition at line 45 of file main.cpp.

Macros

Functions

Variables