Here is a list of all variables with links to the classes they belong to:

- r -

• R : copv.blowdown_solver.TankState, feedtwin.props.backends.coolprop._Dome, fsw::calibration::NoiseCoefficients, HSEM_TypeDef
• r : engine.pipeline.thermal.gas_side.WallContour
• R0 : fsw::calibration::rtd::CVDCoeffs
• r0_ohms : fsw::config::T7Channel
• r_1 : ism330dhcx_slv1_add_t
• r_2 : ism330dhcx_slv2_add_t
• r_3 : ism330dhcx_slv3_add_t
• R_ablative_outer : backend.routers.geometry.GeometryResponse
• R_dn : engine.layerx.diag.start.StartLine
• R_entry : engine.layerx.diag.waterhammer.Pipeline
• R_friction : engine.layerx.diag.waterhammer.Pipeline
• R_gas : backend.routers.geometry.GeometryResponse, engine.control.robust_ddp.dynamics.DynamicsParams, engine.pipeline.stability.chug.ChugChamber
• R_graphite_outer : backend.routers.geometry.GeometryResponse
• r_hi : engine.pipeline.combustion_physics.CstarOfMR
• r_inner : engine.pipeline.config_schemas.BackGrooveConfig
• r_lo : engine.pipeline.combustion_physics.CstarOfMR
• R_opt : engine.pipeline.config_schemas.CombustionEfficiencyConfig
• r_outer : engine.pipeline.config_schemas.BackGrooveConfig
• R_rest : engine.layerx.diag.shutdown.TailSide
• r_specific : feedtwin.comps.base.FlowConditions
• r_squared : autonomous_lc_calibration.SensorCalibrationState, autonomous_pt_calibration.SensorCalibrationState, autonomous_rtd_calibration.SensorCalibrationState, autonomous_tc_calibration.SensorCalibrationState, fsw::calibration::PolynomialCalibration
• R_stainless : backend.routers.geometry.GeometryResponse
• R_table : engine.pipeline.cea_cache.CEACache
• R_valve_open : engine.layerx.diag.shutdown.TailSide
• radiation_emissivity_hot : engine.pipeline.config_schemas.RegenCoolingConfig
• radiation_view_factor : engine.pipeline.config_schemas.RegenCoolingConfig
• radiative_sink_fallback_temperature : engine.pipeline.config_schemas.AblativeCoolingConfig
• radiative_sink_minimum_threshold : engine.pipeline.config_schemas.AblativeCoolingConfig
• radio_errors : radio_status_t
• radio_errors_ : radio_link::Link
• radio_sniff : mode_outputs_t
• radius : backend.routers.flight.RocketConfig, backend.routers.flight.TankConfig, engine.pipeline.config_schemas.RocketConfig
• rail_button_lower_pos_m : engine.pipeline.config_schemas.RocketConfig
• rail_button_upper_pos_m : engine.pipeline.config_schemas.RocketConfig
• rail_exit_velocity_m_s : backend.routers.flight.FlightSimResponse
• rail_length_m : backend.routers.flight.EnvironmentConfig, engine.pipeline.config_schemas.EnvironmentConfig
• raise_timeout : anonymous_namespace{test_main.cpp}::TxChip
• RAMPVALR : DTS_TypeDef
• range_v : fsw::config::T7Channel
• Rank : ADC_ChannelConfTypeDef
• RASR : ARM_MPU_Region_t, MPU_Type
• RASR_A1 : MPU_Type
• RASR_A2 : MPU_Type
• RASR_A3 : MPU_Type
• rate : TestConfig
• rate_ : FakeT7Device, fsw::t7::FakeT7Device
• rate_cap_hz : FakeT7Device::Options, fsw::t7::FakeT7Device::Options
• rate_ms : fake_gnss_t
• rateName : TestConfig
• Ratio : ADC_InjOversamplingTypeDef, ADC_OversamplingTypeDef
• ratio : feedtwin.vessels.geometry.Head
• raw : fsw::calibration::IMUCalibration::CalibrationPoint, StoredConfig
• raw_adc_code : pt_calibration_gui.PTMeasurement
• raw_adc_counts : daq_comms::protocol::RawLCSample, daq_comms::protocol::RawPTSample, daq_comms::protocol::RawTCSample
• raw_bytes : gui.Reader
• raw_count : t7_integration.FakeElodin
• raw_counts : self_test_battery_t
• raw_len : StoredConfig
• raw_readings : imu_calibration_gui.IMUCalibrationGUI
• raw_resistance_counts : daq_comms::protocol::RawRTDSample
• raw_seen : t7_integration.FakeElodin
• raw_unit : CubicChannel, fsw::calibration::CubicChannel
• raw_value : imu_calibration.CalibrationPoint
• RBAR : ARM_MPU_Region_t, MPU_Type
• RBAR_A1 : MPU_Type
• RBAR_A2 : MPU_Type
• RBAR_A3 : MPU_Type
• RCR : TIM_TypeDef
• RDATA : CORDIC_TypeDef, FMAC_TypeDef
• RDFR : MDIOS_TypeDef
• RDPLevel : FLASH_OBProgramInitTypeDef
• RDR : SWPMI_TypeDef, USART_TypeDef
• reaction_progress : engine.pipeline.time_varying_solver.TimeVaryingState
• read : emmc_port_t
• read_battery : idle_port_t, self_test_port_t
• read_budget_ms : emmc_log_config_t
• read_pressure : sequencer::ScriptEnv
• read_reg : stmdev_ctx_t
• read_rx_ : radio_link::Sx1262
• read_tx_ : radio_link::Sx1262
• reader : gui.App, parser, robust_pt_calibration_gui.RobustPTCalibrationGUI
• reader_ : utf8_buffered_reader
• readings_ : PressureFeed, sequencer::PressureFeed
• reads : disk_t, FakeT7Device, fsw::t7::FakeT7Device
• reads_ : FakeT7Device, fsw::t7::FakeT7Device
• READY : combined_fsw_gui.SystemState
• ready : board_sleep_info_t
• ready_state : feedtwin.session.burn.BurnPlan
• real : engine.layerx.capture._ThreadRouter
• realtime : FakeT7Device::Options, fsw::t7::FakeT7Device::Options
• reason : Attempt, backend.routers.flight.TruncationInfo, CaptureResult, fsw::calibration::CaptureResult
• reboot_after_s : board_simulator.TimingPathology
• reboot_on_success : StarOTA::Config
• rec : image_t
• receded : engine.pipeline.thermal.wall_conduction.WallModel
• Receive : _USBD_CDC_Itf
• receive_buffer_ : fsw::streams::SensorFramePipeline
• RECEIVE_BUFFER_SIZE : fsw::streams::SensorFramePipeline
• receive_ip_edit : solenoid_characterization_gui.SolenoidCharacterizationWindow
• received : test_ota_flash.FakeBoard
• receiver : actuator_testing_gui.ActuatorTestingWindow, anonymous_namespace{idle_e2e.cpp}::World, calibration_orchestrator.CalibrationOrchestrator, combined_fsw_gui.ActuatorControlWidget, combined_fsw_gui.CombinedFSWMainWindow, combined_fsw_gui.SensorPlotWidget, combined_gui.ActuatorControlWidget, combined_gui.SensorPlotWidget, imu_calibration_gui.IMUCalibrationGUI, lc_calibration_gui.LCPlotWindow, pt_multi_gui.PTPlotWindow, sense_testing_gui.SenseTestingGUIWindow, solenoid_characterization_gui.SolenoidCharacterizationWindow
• receiverIP : EthernetConfig
• receiverPort : EthernetConfig
• recent_ : CommandDedupe, fsw::calibration::CommandDedupe
• recent_data : smart_calibration_gui.SmartCalibrationGUI
• recent_days : stardesign.documents.DesignStore
• recent_readings_ : fsw::calibration::IMUCalibration
• recent_residuals : robust_calibration.RobustCalibrationFramework
• recent_residuals_ : fsw::calibration::RobustCalibrationFramework
• recent_uncertainties : robust_calibration.RobustCalibrationFramework
• recent_uncertainties_ : fsw::calibration::RobustCalibrationFramework
• ReceptionType : __UART_HandleTypeDef
• recession_allowance : engine.pipeline.thermal.graphite_geometry.GraphiteInsertSizing
• recession_multiplier : engine.pipeline.config_schemas.GraphiteInsertConfig
• recession_rate : engine.pipeline.thermal.graphite_geometry.GraphiteInsertSizing
• RECONNECT_THRESHOLD : fsw::routing::HeartbeatRouter
• record : engine.layerx.analysis.StandTripped, record_sink_t
• record_btn : combined_gui.CalibrationWindow, pt_calibration_gui.HighPerformanceCalibrationGUI
• record_calibration_point : combined_gui.CalibrationWindow
• record_every_s : engine.layerx.diag.start.StartSettings
• RECORD_SIZE : smart_calibration_gui.SmartCalibrationGUI
• RECORD_STRUCT : smart_calibration_gui.SmartCalibrationGUI
• recording : backend.video.Clip, emmc_log_t, parser
• recording_buffer : parser
• recording_data : pt_calibration_gui.HighPerformanceCalibrationGUI, smart_calibration_gui.SmartCalibrationGUI
• recording_whitespace : parser
• records : emmc_log_stats_t
• recovery_factor : engine.pipeline.config_schemas.RegenCoolingConfig
• recs : image_t
• REF2 : ADS126X_ADC2CFG_Type
• REF_ALM : ADS126X_STATUS_Type
• ref_inputs : calibration_orchestrator_gui.CalibrationOrchestratorGUI
• ref_pressure_inputs : combined_gui.CalibrationWindow
• ref_pressure_var : smart_calibration_gui.SmartCalibrationGUI
• ref_pressures : pt_calibration_gui.HighPerformanceCalibrationGUI
• ref_stack : detail::json_sax_dom_callback_parser< BasicJsonType >, detail::json_sax_dom_parser< BasicJsonType >
• ref_volt_spin : combined_gui.SettingsWidget
• ref_voltage : sense_testing_gui.SenseTestingGUIWindow
• ref_voltage_combo : sense_testing_gui.SenseTestingGUIWindow
• ref_voltage_spin : sense_testing_gui.SenseTestingGUIWindow
• reference : engine.layerx.link.EngineLink, feedtwin.model.curve.Curve, feedtwin.model.param.Param, feedtwin.session.model.Assumption, fsw::calibration::IMUCalibration::CalibrationPoint
• reference_blowing_ratio : engine.pipeline.config_schemas.FilmCoolingConfig
• reference_diffusivity : engine.pipeline.config_schemas.GraphiteInsertConfig
• reference_diffusivity_pressure : engine.pipeline.config_schemas.GraphiteInsertConfig
• reference_diffusivity_temperature : engine.pipeline.config_schemas.GraphiteInsertConfig
• reference_field_magnitude : imu_calibration.MagnetometerCalibrator
• reference_forces : autonomous_lc_calibration.AutonomousLCCalibrator
• reference_gauges : pt_calibration_gui.HighPerformanceCalibrationGUI
• reference_pressure : pt_calibration_gui.PTMeasurement
• reference_pressure_pa : backend.routers.flight.FlightSimRequest, engine.pipeline.config_schemas.ThrustConfig
• reference_pressures : autonomous_pt_calibration.AutonomousPTCalibrator, pt_calibration_gui.CalibrationPoint
• reference_temperature : fsw::calibration::IMUCalibration::CalibrationParams, imu_calibration.CalibrationParams
• reference_temps : autonomous_rtd_calibration.AutonomousRTDCalibrator, autonomous_tc_calibration.AutonomousTCCalibrator
• reference_uncertainty : fsw::calibration::IMUCalibration::CalibrationPoint
• reference_value : imu_calibration.CalibrationPoint
• reference_voltage : combined_fsw_gui.SensorPlotWidget, combined_gui.SensorPlotWidget, daq::SensorConfigData, SensorHotfire::StoredSensorConfig, SensorSM::StoredConfig, solenoid_characterization_gui.SolenoidCharacterizationWindow
• reference_wall_temperature : engine.pipeline.config_schemas.FilmCoolingConfig
• references : calibration_orchestrator.CalibrationOrchestrator
• REFMUX : ADS126X_REGISTER_Type
• refresh : combined_gui.SensorDebugDialog
• refresh_budget_fraction : engine.pipeline.config_schemas.HybridOptimizerConfig
• refresh_every_pass : engine.pipeline.config_schemas.HybridOptimizerConfig
• refresh_sigma_scale : engine.pipeline.config_schemas.HybridOptimizerConfig
• refresh_status : ball_valve_gui.BallValveGui
• refresh_timer : combined_gui.SensorDebugDialog
• REFREV : ADS126X_MODE0_Type
• refs : engine.stability_hifi.meanflow.spec.MeanFlowSpec
• refused : sequencer::ScriptLoadResult, world_t
• refused_kg : feedtwin.session.core.TankSim
• refused_states_ : sequencer::SequencerService, SequencerService
• reg : ADS126X_ADC2CFG_Type, ADS126X_ADC2FSC_Type, ADS126X_ADC2MUX_Type, ADS126X_ADC2OFC_Type, ADS126X_FSCAL_Type, ADS126X_GPIOCON_Type, ADS126X_GPIODAT_Type, ADS126X_GPIODIR_Type, ADS126X_ID_Type, ADS126X_IDACMAG_Type, ADS126X_IDACMUX_Type, ADS126X_INPMUX_Type, ADS126X_INTERFACE_Type, ADS126X_MODE0_Type, ADS126X_MODE1_Type, ADS126X_MODE2_Type, ADS126X_OFCAL_Type, ADS126X_POWER_Type, ADS126X_REFMUX_Type, ADS126X_STATUS_Type, ADS126X_TDACN_Type, ADS126X_TDACP_Type
• reg_access : ism330dhcx_func_cfg_access_t
• reg_ratio : engine.control.robust_ddp.data_models.ControllerConfig, fsw::control::RobustDDPController::Config
• reg_setpoint : engine.control.robust_ddp.data_models.ControllerConfig, engine.control.robust_ddp.dynamics.DynamicsParams, fsw::control::RobustDDPController::Config
• regen_cooling : engine.pipeline.config_schemas.PintleEngineConfig
• regime : backend.routers.flight.PropellantDiagnostics
• REGISTER : ADS126X
• REGISTER_ARRAY : ADS126X
• registers : fsw::t7::FakeT7Unit
• regs : fake_regs_t
• regularised_branches : feedtwin.solve.steady.SteadyResult
• regulator : engine.pipeline.stability.chug.ChugStream
• regulator_compressible_seat : feedtwin.session.core.Setup
• regulator_corner_hz : engine.pipeline.config_schemas.StabilityConfig
• regulator_enabled : engine.pipeline.config_schemas.StabilityConfig
• regulator_label : feedtwin.session.burn.Probes
• regulator_max_excursion_psi : engine.pipeline.config_schemas.StabilityConfig
• regulator_min_differential_psi : engine.pipeline.config_schemas.DesignRequirementsConfig
• regulator_outlet : feedtwin.session.burn.Probes
• regulator_supply_pressure_effect : engine.pipeline.config_schemas.DesignRequirementsConfig
• regulator_supply_pressure_effect_source : engine.pipeline.config_schemas.DesignRequirementsConfig
• regulator_xT : feedtwin.session.core.Setup
• regulator_Z_hf : engine.pipeline.config_schemas.StabilityConfig
• regulators : feedtwin.session.hookup.Knob
• rejected : gnss_frame_parser_t
• release : backend.routers.layerx.PidImport
• release_body : stardesign.documents.DesignStore
• release_model : stardesign.documents.DesignStore
• ReloadValue : RCC_CRSInitTypeDef, RCC_CRSSynchroInfoTypeDef
• rem_length : USBD_EndpointTypeDef
• remote_address_ : daq_comms::transport::UDPSocket
• remote_port_ : daq_comms::transport::UDPSocket
• RepetitionCounter : TIM_Base_InitTypeDef
• replay : backend.routers.layerx.SetpointBody, backend.routers.layerx.Settings, engine.layerx.prepare.LayerXSettings, engine.layerx.setpoint.SetpointRequest
• replies : fake_t
• reply : self_test_battery_t, self_test_device_status_t
• report : backend.routers.flight.FlightSimResponse, bringup_report_t
• report_every_n : engine.pipeline.config_schemas.DesignRequirementsConfig
• Request : DMA_InitTypeDef, MDMA_InitTypeDef
• request : _USBD_HandleTypeDef
• request_id : fsw::elodin::PacketHeader
• RequestNumber : HAL_DMA_MuxRequestGeneratorConfigTypeDef, HAL_DMA_MuxSyncConfigTypeDef
• requests_listbox : smart_calibration_gui.SmartCalibrationGUI
• requests_this_hour : autonomous_calibration_engine.ActiveLearningAgent
• require_stable_state : engine.pipeline.config_schemas.DesignRequirementsConfig
• required : feedtwin.model.curve.CurveSpec, feedtwin.model.spec.ParamSpec, self_test_device_status_t, self_test_device_t
• required_failed : boot_report_t
• requirements : backend.routers.optimizer.DesignRequirementsRequest, backend.routers.optimizer.DesignRequirementsResponse
• RES1_TR3 : ADC_TypeDef
• RESERVED : ADC_Common_TypeDef, DMA2D_TypeDef, FLASH_TypeDef, FMC_Bank3_TypeDef, MDIOS_TypeDef, OCTOSPI_TypeDef, RNG_TypeDef, RTC_TypeDef
• Reserved : HSEM_TypeDef, MDMA_LinkNodeTypeDef, USB_OTG_HostChannelTypeDef
• reserved : osThreadAttr_t
• RESERVED0 : CoreDebug_Type, DCB_Type, DTS_TypeDef, DWT_Type, ErrBnk_Type, EWIC_Type, FLASH_TypeDef, FMC_Bank2_TypeDef, FPU_Type, GPV_TypeDef, ICB_Type, ITM_Type, LTDC_Layer_TypeDef, LTDC_TypeDef, MDMA_Channel_TypeDef, MPU_Type, NVIC_Type, PWR_TypeDef, SAI_TypeDef, SCB_Type, SCnSCB_Type, SDMMC_TypeDef, SPI_TypeDef, STL_Type, TPI_Type
• Reserved04 : USB_OTG_INEndpointTypeDef, USB_OTG_OUTEndpointTypeDef
• Reserved0C : USB_OTG_DeviceTypeDef, USB_OTG_INEndpointTypeDef, USB_OTG_OUTEndpointTypeDef
• RESERVED1 : DTS_TypeDef, DWT_Type, ErrBnk_Type, ETH_TypeDef, EXTI_Core_TypeDef, EXTI_TypeDef, FDCAN_GlobalTypeDef, GPV_TypeDef, ITM_Type, LPTIM_TypeDef, LTDC_Layer_TypeDef, LTDC_TypeDef, MemSysCtl_Type, NVIC_Type, OCTOSPI_TypeDef, PSSI_TypeDef, PWR_TypeDef, RCC_TypeDef, SCB_Type, SCnSCB_Type, SDMMC_TypeDef, SPI_TypeDef, SWPMI_TypeDef, SYSCFG_TypeDef, TIM_TypeDef, TPI_Type, TTCAN_TypeDef
• RESERVED10 : DBGMCU_TypeDef, DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• RESERVED11 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef, RCC_TypeDef
• RESERVED117 : GPV_TypeDef
• RESERVED118 : GPV_TypeDef
• RESERVED119 : GPV_TypeDef
• RESERVED12 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef, RCC_TypeDef
• RESERVED13 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef, RCC_TypeDef
• RESERVED14 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• RESERVED15 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• RESERVED16 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• RESERVED17 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• RESERVED18 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• Reserved18 : USB_OTG_INEndpointTypeDef, USB_OTG_OUTEndpointTypeDef
• RESERVED19 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• RESERVED2 : ADC_TypeDef, CRC_TypeDef, DTS_TypeDef, DWT_Type, ErrBnk_Type, ETH_TypeDef, EXTI_Core_TypeDef, EXTI_TypeDef, FDCAN_GlobalTypeDef, GPV_TypeDef, ITM_Type, LTDC_TypeDef, MemSysCtl_Type, NVIC_Type, OCTOSPI_TypeDef, PSSI_TypeDef, RCC_TypeDef, SDMMC_TypeDef, SPDIFRX_TypeDef, SPI_TypeDef, SYSCFG_TypeDef, TPI_Type
• RESERVED20 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• Reserved20 : USB_OTG_DeviceTypeDef
• RESERVED21 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• RESERVED22 : DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• RESERVED23 : DWT_Type, ETH_TypeDef, GPV_TypeDef
• RESERVED24 : DWT_Type, ETH_TypeDef, GPV_TypeDef
• RESERVED25 : DWT_Type, ETH_TypeDef
• RESERVED26 : DWT_Type, ETH_TypeDef
• RESERVED27 : DWT_Type, ETH_TypeDef
• RESERVED28 : DWT_Type, ETH_TypeDef
• RESERVED29 : DWT_Type, ETH_TypeDef
• RESERVED3 : ADC_TypeDef, DWT_Type, ETH_TypeDef, EXTI_TypeDef, FDCAN_GlobalTypeDef, GPV_TypeDef, ITM_Type, LTDC_TypeDef, MemSysCtl_Type, NVIC_Type, OCTOSPI_TypeDef, RCC_TypeDef, SCB_Type, SYSCFG_TypeDef, TPI_Type
• RESERVED30 : DWT_Type, ETH_TypeDef
• Reserved30 : USB_OTG_GlobalTypeDef
• RESERVED31 : DWT_Type, ETH_TypeDef
• RESERVED32 : DWT_Type, ETH_TypeDef
• RESERVED33 : DWT_Type, ETH_TypeDef
• RESERVED34 : ETH_TypeDef
• RESERVED35 : ETH_TypeDef
• RESERVED36 : ETH_TypeDef
• RESERVED37 : ETH_TypeDef
• RESERVED38 : ETH_TypeDef
• RESERVED39 : ETH_TypeDef
• RESERVED4 : ADC_TypeDef, DBGMCU_TypeDef, DWT_Type, ETH_TypeDef, EXTI_TypeDef, FDCAN_GlobalTypeDef, GPV_TypeDef, ITM_Type, MemSysCtl_Type, NVIC_Type, OCTOSPI_TypeDef, RCC_TypeDef, SCB_Type, SYSCFG_TypeDef, TPI_Type
• RESERVED40 : ETH_TypeDef
• Reserved40 : USB_OTG_DeviceTypeDef
• Reserved40C : USB_OTG_HostTypeDef
• RESERVED41 : ETH_TypeDef
• RESERVED42 : ETH_TypeDef
• RESERVED43 : ETH_TypeDef
• Reserved43 : USB_OTG_GlobalTypeDef
• RESERVED44 : ETH_TypeDef
• Reserved44 : USB_OTG_DeviceTypeDef
• RESERVED45 : ETH_TypeDef
• RESERVED5 : ADC_TypeDef, DBGMCU_TypeDef, DWT_Type, ETH_TypeDef, EXTI_TypeDef, FDCAN_GlobalTypeDef, GPV_TypeDef, ITM_Type, MemSysCtl_Type, NVIC_Type, OCTOSPI_TypeDef, RCC_TypeDef, SCB_Type, SYSCFG_TypeDef, TPI_Type
• RESERVED6 : ADC_TypeDef, DBGMCU_TypeDef, DWT_Type, ETH_TypeDef, FDCAN_GlobalTypeDef, GPV_TypeDef, ITM_Type, NVIC_Type, OCTOSPI_TypeDef, RCC_TypeDef, SCB_Type, SYSCFG_TypeDef
• Reserved6 : USB_OTG_GlobalTypeDef
• RESERVED7 : ADC_TypeDef, DBGMCU_TypeDef, DWT_Type, ETH_TypeDef, FDCAN_GlobalTypeDef, GPV_TypeDef, OCTOSPI_TypeDef, SCB_Type, TPI_Type
• RESERVED8 : ADC_TypeDef, DBGMCU_TypeDef, DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef, RCC_TypeDef, SCB_Type
• RESERVED9 : ADC_TypeDef, DBGMCU_TypeDef, DWT_Type, ETH_TypeDef, GPV_TypeDef, OCTOSPI_TypeDef
• Reserved9 : USB_OTG_DeviceTypeDef
• RESERVED_ADD1 : SCB_Type
• RESET : ADS126X_POWER_Type, ADS126X_STATUS_Type
• resets : gnss_core_t
• residual : feedtwin.session.diagnostics.SolverRecord
• residual_history : autonomous_calibration_engine.OnlineBayesianLearner
• resistance_range : calibration_sequence.RTDCalibrator
• Resolution : ADC_InitTypeDef
• resolution_index : fsw::config::T7Board, T7Board
• RESP1 : SDMMC_TypeDef
• RESP2 : SDMMC_TypeDef
• RESP3 : SDMMC_TypeDef
• RESP4 : SDMMC_TypeDef
• RESPCMD : SDMMC_TypeDef
• RESPONSE : combined_fsw_gui.ElodinPacketType
• restart_ : HoldTimer, sequencer::HoldTimer
• restored_theta_cov_ : fsw::calibration::RobustCalibrationManager
• restored_theta_mean_ : fsw::calibration::RobustCalibrationManager
• result : backend.routers.layerx.Job, basic_json< ObjectType, ArrayType, StringType, BooleanType, NumberIntegerType, NumberUnsignedType, NumberFloatType, AllocatorType, JSONSerializer, BinaryType, CustomBaseClass >, daq_comms::protocol::ParsedSelfTestPacket::Result, fake_t, feedtwin.solve.steady.ConvergenceError, self_test_reply_t, SensorSelfTest::BiasReadResult, sequencer::SequencerService::Command, SequencerService::Command
• result_ : formatter
• result_bits : boot_report_t
• results : calibration_sequence.CalibrationSequence, daq_comms::protocol::ParsedSelfTestPacket
• resync_threshold_ms : fsw::time::TimeSyncConfig, TimeSyncConfig
• resyncs : BoardClockSync::BoardStats, fsw::time::BoardClockSync::BoardStats
• retained_fraction : engine.layerx.diag.start.StartChamber, engine.layerx.diag.start.StartSettings
• retry_after_ : fsw::elodin::SubscriptionTracker, SubscriptionTracker
• retry_at_ : fsw::elodin::SubscriptionTracker, SubscriptionTracker
• retry_at_ms : self_test_probe_state_t
• retry_at_us : sensors_device_t
• retry_interval_ms : self_test_config_t
• retry_wait : self_test_probe_state_t
• return_state : sequencer::SequencerService::HoldRule, SequencerService::HoldRule
• return_target : Cfg, FlowCfg, fsw::config::FlowConfig, sequencer::DynamicState
• REV_ID : ADS126X_ID_Type
• reversed : feedtwin.session.network_trace.BranchInfo
• rf : gnss_core_t
• rf_reports : gnss_core_t
• RFL : SWPMI_TypeDef
• RFSR : SCB_Type
• RGCFR : DMAMUX_RequestGenStatus_TypeDef
• RGCR : DMAMUX_RequestGen_TypeDef
• RGSR : DMAMUX_RequestGenStatus_TypeDef
• rho : copv.blowdown_solver.TankState, engine.control.robust_ddp.data_models.ControllerConfig, engine.core.injectors.impinging._RingManifold, engine.stability_hifi.meanflow.spec.MeanFlowSpec, feed_line_K.Run, fsw::control::RobustDDPController::Config
• rho_c : feedtwin.props.backends.coolprop._Dome
• rho_F : engine.control.robust_ddp.data_models.ControllerConfig, fsw::control::RobustDDPController::Config
• rho_l : engine.pipeline.stability.timelag.StreamThermo
• rho_O : engine.control.robust_ddp.data_models.ControllerConfig, fsw::control::RobustDDPController::Config
• rhs : fsw::script::Expr, sequencer::Expr
• RightBitShift : ADC_InjOversamplingTypeDef, ADC_OversamplingTypeDef
• rim_gland : engine.pipeline.config_schemas.InjectorPlateConfig
• rings_ : CaptureWindow, fsw::calibration::CaptureWindow
• RIS : PSSI_TypeDef
• RISR : DCMI_TypeDef
• RLAR : ARM_MPU_Region_t, MPU_Type
• RLAR_A1 : MPU_Type
• RLAR_A2 : MPU_Type
• RLAR_A3 : MPU_Type
• RLR : HSEM_TypeDef, IWDG_TypeDef
• rls_P : robust_calibration.RobustCalibrationFramework
• rls_P_ : fsw::calibration::RobustCalibrationFramework
• rmse : CubicFit, fsw::calibration::CubicFit
• RMUXN : ADS126X_REFMUX_Type
• RMUXP : ADS126X_REFMUX_Type
• RngClockSelection : RCC_PeriphCLKInitTypeDef
• RNR : MPU_Type
• robust : calibration_orchestrator.CalibrationOrchestrator
• robust_frameworks : combined_gui.CalibrationWindow
• robustness_manager : calibration_orchestrator.CalibrationOrchestrator
• rocket : backend.routers.flight.FlightSimRequest, engine.pipeline.config_schemas.PintleEngineConfig
• rocket_diagram : backend.routers.flight.FlightSimResponse
• rocket_length : backend.routers.flight.RocketConfig, engine.pipeline.config_schemas.RocketConfig, payload.cold_gas_thruster.ColdGasThrusterConfig
• rocket_mass : payload.cold_gas_thruster.ColdGasThrusterConfig
• rocket_radius : payload.cold_gas_thruster.ColdGasThrusterConfig
• role : CubicChannel, feedtwin.pid.document.PidNode, feedtwin.session.hookup.ValveInfo, fsw::calibration::CubicChannel, fsw::config::PtRoleRef, fsw::config::T7Channel
• role_by_table_ : PressureFeed, sequencer::PressureFeed
• roles : engine.layerx.prepare.Prepared, feedtwin.props.species.SpeciesSpec
• roles_ : ActuatorCommander, sequencer::ActuatorCommander
• root : detail::json_sax_dom_callback_parser< BasicJsonType >, detail::json_sax_dom_parser< BasicJsonType >, parser, pt_calibration_gui.HighPerformanceCalibrationGUI, smart_calibration_gui.SmartCalibrationGUI
• root_chord : backend.routers.flight.FinsConfig, engine.pipeline.config_schemas.FinsConfig
• root_fsw_dir : Config::NetworkConfig
• ROT_MF : SystemParameters
• ROT_MO : SystemParameters
• rotation : feedtwin.pid.document.PidNode
• roughness : engine.pipeline.config_schemas.RegenCoolingConfig, feedtwin.model.segments.LineSegment
• roughness_m : engine.pipeline.config_schemas.FeedSystemConfig
• rounding : ism330dhcx_ctrl5_c_t
• rows : feed_line_K.Run, feedtwin.session.hookup.Hookup
• rp1_h : engine.pipeline.config_schemas.FuelTankConfig
• rp1_radius : engine.pipeline.config_schemas.FuelTankConfig
• RQR : USART_TypeDef
• RSERVED1 : NVIC_Type
• RSR : RCC_TypeDef
• rssi_pkt_ : radio_link::FakeChip
• rssi_x2 : radio_link::PacketStatus, radio_rx_t
• rst_counter_bdr : ism330dhcx_counter_bdr_reg1_t
• rst_master_regs : ism330dhcx_master_config_t
• rst_n_function : emmc_card_info_t
• rtc_wakes : board_sleep_info_t
• RTCClockSelection : RCC_PeriphCLKInitTypeDef
• rtd_adc_ref_voltage : fsw::config::CalibrationConfig
• rtd_calibration_ : fsw::routing::SensorRouter
• rtd_csv_path : fsw::config::CalibrationConfig
• rtd_excitation_ua : fsw::config::CalibrationConfig
• rtd_json_dir : fsw::config::CalibrationConfig
• RTD_O1 : SystemParameters
• RTD_O2 : SystemParameters
• RTD_O3 : SystemParameters
• rtd_r0_ohm : fsw::config::CalibrationConfig
• rtd_samples : daq_comms::protocol::SensorBatch
• RTOR : USART_TypeDef
• RTSR1 : EXTI_TypeDef
• RTSR2 : EXTI_TypeDef
• RTSR3 : EXTI_TypeDef
• run : anonymous_namespace{idle_e2e.cpp}::Check, check_t, FakeDb, FakeDbRefuseFirst
• run_ : FakeElodin
• run_self_test : SensorHotfire::Config
• RUNMODE : ADS126X_MODE0_Type
• runner : backend.state.AppState, engine.control.robust_ddp.engine_wrapper.EngineWrapper, engine.layerx.card.EngineSampler, engine.pipeline.chamber_optimizer.ChamberOptimizer, engine.pipeline.comprehensive_optimizer.ComprehensivePintleOptimizer, engine.pipeline.system_diagnostics.SystemDiagnostics, test_robust_ddp_engine_wrapper.TestEngineWrapperIntegration
• running : autonomous_lc_calibration.AutonomousLCCalibrator, autonomous_pt_calibration.AutonomousPTCalibrator, autonomous_rtd_calibration.AutonomousRTDCalibrator, autonomous_tc_calibration.AutonomousTCCalibrator, board_simulator.SimulatedBoard, calibration_orchestrator.CalibrationOrchestrator, calibration_orchestrator_gui.CalibrationOrchestratorGUI, controller_integration.ActuatorComm, imu_calibration_gui.UDPReceiver
• running_ : BoardListener, daqtest::BoardListener, fsw::control::ControllerService, fsw::control::PressureStateMachine, PressureFeed, sequencer::PressureFeed
• rupe_Em_curvature : engine.pipeline.config_schemas.CombustionEfficiencyConfig
• rupe_Em_opt : engine.pipeline.config_schemas.CombustionEfficiencyConfig
• rupe_M_opt : engine.pipeline.config_schemas.CombustionEfficiencyConfig
• rw_0 : ism330dhcx_slv0_add_t
• RWD : FDCAN_GlobalTypeDef
• rx : fake_gnss_t, self_test_spi_frame_t
• rx_ : radio_link::Sx1262Setup
• rx_len_ : radio_link::FakeAir
• rx_mode_ : radio_link::Sx1262Setup
• rx_ns : fsw::calibration::AdcSample
• rx_switch : anonymous_namespace{idle_e2e.cpp}::Control, anonymous_namespace{test_main.cpp}::Control, anonymous_namespace{test_main.cpp}::IdleControl
• rx_switch_during_tx : anonymous_namespace{test_main.cpp}::Control
• rx_timer : ball_valve_gui.BallValveGui
• RXBC : FDCAN_GlobalTypeDef
• RxBuffer : USBD_CDC_HandleTypeDef
• RXCRC : SPI_TypeDef
• RxCRCInitializationPattern : SPI_InitTypeDef
• RXDR : CEC_TypeDef, I2C_TypeDef, SPI_TypeDef
• RXESC : FDCAN_GlobalTypeDef
• RxEventType : __UART_HandleTypeDef
• RXF0A : FDCAN_GlobalTypeDef
• RXF0C : FDCAN_GlobalTypeDef
• RXF0S : FDCAN_GlobalTypeDef
• RXF1A : FDCAN_GlobalTypeDef
• RXF1C : FDCAN_GlobalTypeDef
• RXF1S : FDCAN_GlobalTypeDef
• RxISR : __SPI_HandleTypeDef, __UART_HandleTypeDef
• RxLength : USBD_CDC_HandleTypeDef
• RxPinLevelInvert : UART_AdvFeatureInitTypeDef
• RxState : __UART_HandleTypeDef, USBD_CDC_HandleTypeDef
• RxXferCount : __SPI_HandleTypeDef, __UART_HandleTypeDef
• RxXferSize : __SPI_HandleTypeDef, __UART_HandleTypeDef